another, bogs at takeoff after warm up

[ped]

Bogging is a lean condition. Idle jet's not adjustable, and you've changed the main jet.

Any of you guys ever try changing out the venturi tube? This is the tube under the main jet. It controls the mix at 1/4 to 3/4 throttle.

Suspect that it's lean for what you're doing. Perhaps get a spare and drill it out? These parts are available from Honda but I've never understood the numbering structure.

thanks. I never change a venturi tube before. I will take a look. when I find the problem I will post it.
I have two other peds with this same setup, and this is the only one that's giving me problems.

[paulpauly7]

I told you its lean on the pilot jet .What you wont is a jap dio stock carb the have a changeable piot jet and main jet .Ive got two spare but shippng kills the price

[ped]

I told you its lean on the pilot jet .What you wont is a jap dio stock carb the have a changeable piot jet and main jet .Ive got two spare but shippng kills the price

oh ok. I didn't know they made a stock carb with changeable pilot jet. I need a small carb to save gas. let me see if I can fine one locally. if not I will get back to you. thank you paul.

[ped]

I changed the carb with another stock one. and it's still bogging at take off. looks like I will need a bigger carb or one with changeable pilot jets.

[ped]

I finally order a new 24mm carb. I hope this fix my bog down problem. I will post a pic when it get in.