MY SPREE IDLES, BUT DOESN'T RUN UNDER LOAD
Moderator: Moderator
- Superspike
- Noob
- Posts: 3
- Joined: Sat Jul 31, 2004 8:00 pm
- Contact:
MY SPREE IDLES, BUT DOESN'T RUN UNDER LOAD
My 1985 Honda Spree had sat for about 1 year. When it had run previous to this it would only do approx. 5-7 mph. Then one day it wouldn't run. I finally dug it out (I'm a college student, walking sucks). I put a new battery in it. It will start without applying gas, it will idle but will not go under load, it chokes out. Any carb diagrams, any help is greatly appreciated.
- Superspike
- Noob
- Posts: 3
- Joined: Sat Jul 31, 2004 8:00 pm
- Contact:
Air Cleaner
Yes, I purchased a brand new filter element, and installed it, and checked to make sure the box is sealed and plumbed, everything is in order. I believe it may have something to do with the way I have the choke installed?, Does it matter? Also I need to reset the jets. If anyone has the specs for the carb so i can see where to set the choke, if it matters. Also where do i set the clip on the needle?