carb main bolts
Moderator: Moderator
carb main bolts
anyone know the size and lenth of the 2 main carb bolts that hold the carb on?not the ones that go on the pulley part,but the main part that just like floats there.4 carb bolts total.only need 2.
Couple of ways to do this (you must be working on an Elite, Spree have 2:)
1) Use a toothpick/paperclip/wire, run this down the hole and measure the length with the carb intake in place. Use a slightly shorter fastener for that hole.
2) Go to partsfish.com and look up the bolts there, if you select them it lists the length, in millimeters.
Have fun.
1) Use a toothpick/paperclip/wire, run this down the hole and measure the length with the carb intake in place. Use a slightly shorter fastener for that hole.
2) Go to partsfish.com and look up the bolts there, if you select them it lists the length, in millimeters.
Have fun.
Admin, Hondaspree.net
Buy air filters and gaskets here (Ebay): http://stores.ebay.com/noiseguysstore
Buy air filters and gaskets here (Amazon): www.amazon.com/shops/spreepower
Buy a t-shirt here: https://teespring.com/stores/spree-powersport-products
Buy air filters and gaskets here (Ebay): http://stores.ebay.com/noiseguysstore
Buy air filters and gaskets here (Amazon): www.amazon.com/shops/spreepower
Buy a t-shirt here: https://teespring.com/stores/spree-powersport-products
Edd, If you can send a pic. with a reference scale, I'LL be able to help.
Or be more specific. on the part.
I have literally thousands of Spree parts from A to Z.
Thanks, Greg
uspmale@yahoo.com
Or be more specific. on the part.
I have literally thousands of Spree parts from A to Z.
Thanks, Greg
uspmale@yahoo.com
- lonelywanderer
- Spree
- Posts: 106
- Joined: Sat Dec 31, 2005 7:00 pm
- Location: Hi
- hrnytrtlsgsxr
- Elite
- Posts: 719
- Joined: Sat Dec 31, 2005 7:00 pm
- lonelywanderer
- Spree
- Posts: 106
- Joined: Sat Dec 31, 2005 7:00 pm
- Location: Hi