help with cylinder
Moderator: Moderator
- fastplastic
- CB900F
- Posts: 1161
- Joined: Tue May 11, 2010 7:37 pm
- Location: Manistee, MI
- Gingerbread Man
- Spree
- Posts: 128
- Joined: Tue Apr 13, 2010 10:59 pm
- Location: Phoenix, AZ
Re: help with cylinder
You can always add octane booster to your gas. I did on my YZ250 which had 155 psi compression.
2007 CH80
- Gingerbread Man
- Spree
- Posts: 128
- Joined: Tue Apr 13, 2010 10:59 pm
- Location: Phoenix, AZ
Re: help with cylinder
You will be fine. If you want add a little RTV sealant where you have no gasket.
2007 CH80
Re: help with cylinder
Skip the octane booster, it doesn't work worth a crap and is not worth the money. It take in the neighborhood of 200 to 220 PSI static compression numbers before premium will not handle the dynamic compression.Gingerbread Man wrote:You can always add octane booster to your gas. I did on my YZ250 which had 155 psi compression.
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
- Gingerbread Man
- Spree
- Posts: 128
- Joined: Tue Apr 13, 2010 10:59 pm
- Location: Phoenix, AZ
Re: help with cylinder
Octane booster stopped the pinging on WOT runs for my YZ.
Yes the EX goes towards the exhaust port on your cylinder.
4oz of oil to 1 gallon of gas is 32:1.
Yes the EX goes towards the exhaust port on your cylinder.
4oz of oil to 1 gallon of gas is 32:1.
2007 CH80
Re: help with cylinder
first off thats too heavy of rollers..try all 6grams..and i honestly think thats to big of a jet...i could be wrong but try a 88 or 85 or somethin
1988 yamaha zuma
polini evolution kit
polini evolution 2 exhaust
polini big reed manifold
dellorto 21mm
keli clutch
keli variator
polini evolution kit
polini evolution 2 exhaust
polini big reed manifold
dellorto 21mm
keli clutch
keli variator