Bearing loose in the cover/case
Moderator: Moderator
Bearing loose in the cover/case
If the a bearing is not snug in the case is there anything you can do beside replacing the cover or the case half?
1993 Elite - The Mad Max
Re: Bearing loose in the cover/case
Nope! But chances are the bearing or bushing on the other end of the shaft is screwed also.
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
-
- CBR1000RR
- Posts: 4219
- Joined: Thu Mar 05, 2009 9:02 pm
- Location: Iowa, USA
Re: Bearing loose in the cover/case
You can get an industrial shim or weld the bearing in place depending on the application. You can have the case filled, then machine it to spec.mr pibbs wrote:If the a bearing is not snug in the case is there anything you can do beside replacing the cover or the case half?
motormike wrote:Errands become adventures.