What is the oil line size and how much oil would be coming out at idle? I have been running premix because I was unsure if my pump was functioning so today I pulled the line off and got a few drops come out(In like a 1 second span before I put the line back on).
Anyway what is the line size(probably says in manual but I am to lazy to check) and how much oil should come out at idle.
I have an 86 aero50(NB50)
Oil line size?
Moderator: Moderator
Oil line size?
PS3 it only does everything.
- Wheelman-111
- Moderator
- Posts: 11322
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: Oil line size?
Greetings:
Oil line is 1/8th inch here in the U. S. and A.
How much oil at idle: A li'l bit.
Oil line is 1/8th inch here in the U. S. and A.
How much oil at idle: A li'l bit.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Re: Oil line size?
Should I keep using premix or switch to using just gas and the oil pump?
PS3 it only does everything.
Re: Oil line size?
If I am unsure of the oil injection system function, I run a 50-1 premix and top off the oil tank. Then run a couple of tanks of the premix thru the engine. Then if the oil level in the tank has dropped, I drop the pre-mix and just run the injection system.toad772 wrote:Should I keep using premix or switch to using just gas and the oil pump?
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Re: Oil line size?
But if the pump is good it is safe to use just it(People in that oil pump thread were saying they fried many bores).Bear45-70 wrote:If I am unsure of the oil injection system function, I run a 50-1 premix and top off the oil tank. Then run a couple of tanks of the premix thru the engine. Then if the oil level in the tank has dropped, I drop the pre-mix and just run the injection system.toad772 wrote:Should I keep using premix or switch to using just gas and the oil pump?
PS3 it only does everything.
- Wheelman-111
- Moderator
- Posts: 11322
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: Oil line size?
Greetings:
I'd rely on the pump alone for any stock or Stock-ish Honda product, forever.
I'd rely on the pump alone for any stock or Stock-ish Honda product, forever.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Re: Oil line size?
My scooter is completely stock.Wheelman-111 wrote:Greetings:
I'd rely on the pump alone for any stock or Stock-ish Honda product, forever.
PS3 it only does everything.
Re: Oil line size?
+1Wheelman-111 wrote:Greetings:
I'd rely on the pump alone for any stock or Stock-ish Honda product, forever.
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree