starter motor doesn't work

Jfunkhsr · Post by **Jfunkhsr** » Tue Mar 21, 2006 6:38 pm

starter motor won't turn over

-just got it from a guy on ebay (said it worked properly)
-battery charged fully i think -brake light and turn signals work, but do dim when i try to turn the starter motor
-starter motor made a sound but didn't turn, pulled it out and checked and re-checked ground and it eventually stopped making any noise when i pushed the button
-stater relay is clicking when i push start

any ideas?

deathwish · Post by **deathwish** » Tue Mar 21, 2006 6:47 pm

i had a simalar problem... i bypassed the starter relay and the starter truned over...once i got a new relay it worked fine

Jfunkhsr · Post by **Jfunkhsr** » Tue Mar 21, 2006 7:35 pm

how do i bypass relay?

gman75 · Post by **gman75** » Wed Mar 22, 2006 12:59 pm

I would BRIEFLY (<1 sec) hook up a 12V battery directly to the starter and see if it turns over. If not, you have a motor problem.

85stroka · Post by **85stroka** » Wed Mar 22, 2006 11:50 pm

wack that sucker with a hammer when trying to use the electric start!

darat · Post by **darat** » Thu Mar 23, 2006 12:06 am

I found out that a hammer and duck take can fix every thing...lol

85stroka · Post by **85stroka** » Thu Mar 23, 2006 12:21 am

darat wrote:I found out that a hammer and duck take can fix every thing...lol

dont forget the super glue and jb weld!

MySpree · Post by **MySpree** » Thu Mar 23, 2006 10:38 am

jb weld.... a magical thing...

JDspree · Post by **JDspree** » Sat Mar 25, 2006 9:55 pm

My starter motor wasnt working so I took it apart and it turns out the previous owners took it offroad and messed everything up so I had to get some toothbrush type things and "clean" it by lightly rubing the inside of the starter motor with the brush. Then it worked fine

(it's beter than going out to buy a new one when you dont have much extra money)