86' spree: Low end power

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

Post Reply
User avatar
Spree<3
Spree
Spree
Posts: 108
Joined: Sun Jun 19, 2011 2:31 pm
Location: oregon

86' spree: Low end power

Post by Spree<3 »

Any ideas on ways to improve my low end power? Take off is very slugish and I want more :smile:
1986 Spree
sprite2011
Spree
Spree
Posts: 257
Joined: Tue Jun 28, 2011 11:24 pm
Location: Virginia Beach

Re: 86' spree: Low end power

Post by sprite2011 »

Lose 3/4's of your weight or do a motor swap.
User avatar
SuprasNsprees
Elite
Elite
Posts: 564
Joined: Mon Jun 20, 2011 2:05 pm
Location: saint louis
Contact:

Re: 86' spree: Low end power

Post by SuprasNsprees »

is it properly tuned ?


mine had a HUGE lean spot from about 5-15mph, untill i figured out the idle and mixture settings better
'86 Honda Spree : taz stage3 w/ mild porting, head milled 0.015", and pulley mod. 2k+ mies on kit
'80 Puch Magnum MKII
'78 Maxi Newport. Polini 64cc case matched, hi comp head, Rito alum crank, delorto 21mm race, etc.
'78 PA50 Hobbit
User avatar
Spree<3
Spree
Spree
Posts: 108
Joined: Sun Jun 19, 2011 2:31 pm
Location: oregon

Re: 86' spree: Low end power

Post by Spree<3 »

Just lost 20 lbs... but doubt I'll be able to get down to 46 lbs any time soon. :smile:

I have it tuned pretty good. Just changed belt and did a full carb clean...helped mid and high,but low is same.

No mods that will help - other than Dio swap?
1986 Spree
User avatar
motormike
Moderator
Moderator
Posts: 5495
Joined: Wed Dec 29, 2010 10:58 pm
Location: Glasgow, KY

Re: 86' spree: Low end power

Post by motormike »

.....Hey,...Spree<3....let some skinny, trustworthy, friend ride it and see how it does....I weigh 195 now and have seen 225 as well as 165,......Little Spree run sluggish take-off when I'm 200+...OK when 195-175.....much better under 165..... :hi:
RideRed
<(2)Gyro S><Helix><Sym Wolf>
"Live Large - Ride Small"
User avatar
Spree<3
Spree
Spree
Posts: 108
Joined: Sun Jun 19, 2011 2:31 pm
Location: oregon

Re: 86' spree: Low end power

Post by Spree<3 »

Trustworthy friends?? Where do I find one of those? :wink:

I'm at about 175 and its not doing well untill I hit about 12mph. My daughter - at 110 - rode it and it was still very slow on take off. And uphill... fegedaboudit. Unfortunately, I live in a hilly area :sad:

I'll have to check my airbox/intake again... make sure I got it hooked up tight.
1986 Spree
User avatar
Bear45-70
CBR1000RR
CBR1000RR
Posts: 9687
Joined: Mon Jul 23, 1973 10:24 am
Location: Hoodsport, WA.

Re: 86' spree: Low end power

Post by Bear45-70 »

Spree's have low end power? Since when?

Get a big block and the carb, intake and adapter from Tazland001. Other than that you are NOT gonna have low end power with a Spree. Or get a variated engine and swap it in to the Spree.
Bear 45/70
Image

'83 Aero 80 X 3
'84 Aero 80 X 3

'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
User avatar
martynkim
Board Supporter
Board Supporter
Posts: 2899
Joined: Tue Jan 05, 2010 10:22 pm
Location: Tacoma, Washington

Re: 86' spree: Low end power

Post by martynkim »

Bear45-70 wrote:Spree's have low end power? Since when?

Get a big block and the carb, intake and adapter from Tazland001. Other than that you are NOT gonna have low end power with a Spree. Or get a variated engine and swap it in to the Spree.

OH YEAH!
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
Post Reply