Need Help 86 Spree

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

Post Reply
Rocky101
Noob
Noob
Posts: 3
Joined: Sat Aug 13, 2011 4:10 am
Location: US

Need Help 86 Spree

Post by Rocky101 »

We took out my relatives old 1986 Honda Spree that was sitting in there garage for years and we Got it to work for a couple of seconds and it runs longer when we spray carb or choke cleaner in the carborator.so we can get it to start alot of the time but it runs for a few seconds then stops. And it rides and the lights work too... We tried cleaning the outside area...so does anyone tell us how to fix it? Here is a picture of what it looks like...

http://www.google.com/imgres?q=honda+sp ... 80&bih=909
User avatar
Bear45-70
CBR1000RR
CBR1000RR
Posts: 9687
Joined: Mon Jul 23, 1973 10:24 am
Location: Hoodsport, WA.

Re: Need Help 86 Spree

Post by Bear45-70 »

Bear 45/70
Image

'83 Aero 80 X 3
'84 Aero 80 X 3

'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Rocky101
Noob
Noob
Posts: 3
Joined: Sat Aug 13, 2011 4:10 am
Location: US

Re: Need Help 86 Spree

Post by Rocky101 »

We cleaned the outide but havent taken it apart yet
User avatar
Spree<3
Spree
Spree
Posts: 108
Joined: Sun Jun 19, 2011 2:31 pm
Location: oregon

Re: Need Help 86 Spree

Post by Spree<3 »

There are a lot of threads on here about what you need to do. Seems like everyone's relative had one of these in the garage/barn/shed for the last 10-15 years.

Follow the link Bear gave... then search the boards for the more specific things like... Clean and oil the Air Filter... clean/replace fuel line... recarbonize the muffler/piston/head.

But that is if you want this thing to be running well. If you just want something to mess around on, then do whatever it takes to keep it running and hope it lasts for a few months of fun :smile:
1986 Spree
User avatar
dun rite
Board Supporter
Board Supporter
Posts: 709
Joined: Fri Apr 15, 2011 2:07 pm
Location: Naalehu, Hi

Re: Need Help 86 Spree

Post by dun rite »

Rocky101 wrote:spray carb or choke cleaner in the carborator
not a good idea to use either of these to run a 2 cycle engine on. they have no lubrication, in fact it removes any oil still lingering on the cyl walls. your looking for a seized engine if you keep using it. on a better note use a fuel/oil mix to prime your 2 strokes.
taz 50mm bbk, 51g. rollers,1500 c spring
24mm arreche, #20 pilot, E2 needle clip on lower groove
arreche air filter
Naruku intake, reeds & block
v8 pipe
stock gears
trail tech temp & rpm gauges
User avatar
Bear45-70
CBR1000RR
CBR1000RR
Posts: 9687
Joined: Mon Jul 23, 1973 10:24 am
Location: Hoodsport, WA.

Re: Need Help 86 Spree

Post by Bear45-70 »

Spree<3 wrote:There are a lot of threads on here about what you need to do. Seems like everyone's relative had one of these in the garage/barn/shed for the last 10-15 years...........................
The reason being that in 4 short years the Spree sold over 363,000 units in the US.

Image
Bear 45/70
Image

'83 Aero 80 X 3
'84 Aero 80 X 3

'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
User avatar
Spree<3
Spree
Spree
Posts: 108
Joined: Sun Jun 19, 2011 2:31 pm
Location: oregon

Re: Need Help 86 Spree

Post by Spree<3 »

Thats a lot of Sprees :coolcruise: :coolcruise: :coolcruise: :coolcruise: :coolcruise: :coolcruise: :coolcruise: :coolcruise: :coolcruise: :coolcruise: :coolcruise: :coolcruise: :coolcruise: :coolcruise: :coolcruise: :coolcruise: :coolcruise: :coolcruise: :coolcruise: :coolcruise: :coolcruise: :smile: :lol:
1986 Spree
Post Reply