Honda sa50 overheat
Moderator: Moderator
-
- Noob
- Posts: 13
- Joined: Thu Sep 29, 2011 10:51 pm
- Location: North carolina
Honda sa50 overheat
Hey guys any way to rig a liquid cooler or make my own for a air cooled bike ??
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: Honda sa50 overheat
why do you want a water cooled scooter?Tsvarian123 wrote:Hey guys any way to rig a liquid cooler or make my own for a air cooled bike ??
do you have a 50cc scooter?
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
-
- Noob
- Posts: 13
- Joined: Thu Sep 29, 2011 10:51 pm
- Location: North carolina
Re: Honda sa50 overheat
Have a sa 50 elite Honda 2001 replaced the 50 cc with a 50 mm piston kit and a 78 jet I believe in the carb new racing cdi high output coil and oil pump is zipped open
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: Honda sa50 overheat
You need a carb with a replaceable pilot jet not a water cooled bore.Tsvarian123 wrote:Have a sa 50 elite Honda 2001 replaced the 50 cc with a 50 mm piston kit and a 78 jet I believe in the carb new racing cdi high output coil and oil pump is zipped open
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
-
- Noob
- Posts: 13
- Joined: Thu Sep 29, 2011 10:51 pm
- Location: North carolina
Re: Honda sa50 overheat
Stock carb but main jet replaced I'm just having a heck of a time it's overheating bad blown 2 heads so far ... Rings were filed down when I opened head and piston was heavily scored and scratched
- mopro logan
- Spree
- Posts: 141
- Joined: Thu May 26, 2011 4:52 am
- Location: 49660
Re: Honda sa50 overheat
Trafficjamz wrote:You need a carb with a replaceable pilot jet not a water cooled bore.Tsvarian123 wrote:Have a sa 50 elite Honda 2001 replaced the 50 cc with a 50 mm piston kit and a 78 jet I believe in the carb new racing cdi high output coil and oil pump is zipped open
Trafficjamz is right you need a new carb so you can change both pilot and main jets.
Re: Honda sa50 overheat
at least put in a larger main. my 50mm came with a 100. Haven't seen temps over 307 after a long uphill run then stop at stop sign
taz 50mm bbk, 51g. rollers,1500 c spring
24mm arreche, #20 pilot, E2 needle clip on lower groove
arreche air filter
Naruku intake, reeds & block
v8 pipe
stock gears
trail tech temp & rpm gauges
24mm arreche, #20 pilot, E2 needle clip on lower groove
arreche air filter
Naruku intake, reeds & block
v8 pipe
stock gears
trail tech temp & rpm gauges
-
- Goped
- Posts: 71
- Joined: Sun Sep 12, 2010 3:46 am
Re: Honda sa50 overheat
sounds like your gonna need a new bore sooner then later.
-
- Noob
- Posts: 13
- Joined: Thu Sep 29, 2011 10:51 pm
- Location: North carolina
Re: Honda sa50 overheat
I mean the last time I blew a cylinder it was scored and scratched badly ..