Interesting problem with throttle

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

User avatar
Farfignugin
Veteran OG
Veteran OG
Posts: 489
Joined: Mon Jul 23, 1973 10:24 am
Location: Unadilla, NY

Post by Farfignugin »

So, on the thermal thing, there is an arrow, where and what way is it supposed to go? at the moment it is towards the side pannel pointing away from
the carb, is that correct?
User avatar
mopedman
CB900F
CB900F
Posts: 1214
Joined: Mon Jul 23, 1973 10:24 am
Location: sterling Heights MI
Contact:

Post by mopedman »

i dk, i never realy looked at one of those up close
Michigan Moped Mafia founding member
2005 Yamaha Zuma
1985 Honda Spree
1978 Honda Express
berreta22
Elite
Elite
Posts: 509
Joined: Wed Mar 22, 2006 2:04 pm
Location: Grand Rapids,Mi
Contact:

Post by berreta22 »

you will know if its on right by looking at the edges of it...it should be flush (even) all the way around with the intake...if this was installed backwards the bottom edge of the brown part would stick out...you cant really miss it
Last edited by berreta22 on Tue May 09, 2006 10:04 pm, edited 1 time in total.
User avatar
Farfignugin
Veteran OG
Veteran OG
Posts: 489
Joined: Mon Jul 23, 1973 10:24 am
Location: Unadilla, NY

Post by Farfignugin »

I have found problem and made new topic w/ proper subject: Fuel flow problem (in carb), but then even that isnt correct, dang. It should be Vaccume problem
Post Reply