tyre sizes

deckstar · Post by **deckstar** » Mon Apr 09, 2012 10:00 am

Hi
I have a honda aero i want to fit some new tyres currently they are 3.5 x 10 but seen some nice looking 120/90 x 10 would these fit? Or what is the biggest size tyre i could possibly fit?

cheers

eliteguy50 · Post by **eliteguy50** » Mon Apr 09, 2012 10:06 am

Which Aero do you have: 50, 80, or 125?

deckstar · Post by **deckstar** » Mon Apr 09, 2012 10:08 am

its a 50cc
but its a UK edition bike honda vision NB, i think its the same as the aero

deckstar · Post by **deckstar** » Mon Apr 09, 2012 10:10 am

These are the tyres im looking at http://www.bits4motorbikes.co.uk/Tyres/ ... TryeID=283

eliteguy50 · Post by **eliteguy50** » Mon Apr 09, 2012 10:16 am

deckstar wrote:These are the tyres im looking at http://www.bits4motorbikes.co.uk/Tyres/ ... TryeID=283

That tire won't fit. I run that tire on the BWS50 and it is much taller and over an inch wider than you current 3.5x10.

deckstar · Post by **deckstar** » Mon Apr 09, 2012 10:21 am

eliteguy50 wrote:
deckstar wrote:These are the tyres im looking at http://www.bits4motorbikes.co.uk/Tyres/ ... TryeID=283
That tire won't fit. I run that tire on the BWS50 and it is much taller and over an inch wider than you current 3.5x10.

fair enough, what sore of tire would you recommend for my bike?

motormike · Post by **motormike** » Mon Apr 09, 2012 1:06 pm

Greetings deckstar:

the 120/90 would never fit Vision 50. Just too little room for all the width.

The 3.50 X 10 running now equates to a 90/90 X 10 and that is probably as large as you will be allowed to fit.

Should you attempt to fit 100/90, most likely there will be clearance issues. I previously owned an Aero 50 and installed 3.00X10 rubber. Honestly, I am a little surprised that the 3.50's are able to fit.....

deckstar · Post by **deckstar** » Tue May 22, 2012 5:39 am

Your right not sure where i got 3.5 x 10 from!! they are presently 2.75 x 10. Could i fit a 3.00 x 10 what would be the equivalent in a metric size?

deckstar · Post by **deckstar** » Tue May 22, 2012 5:43 am

ok seems like a found the answer from another thread

bakaracer wrote:yeah you can run a 3.00x10 tire or a 80/90-10 tire up front. for the back you can run a 90/90-10 tire. there are some 3.50x10 tires that will fit without rubbing but for sure a 90/90-10 will fit. the taller tire will give you another 2-3mph more topend too. try to keep the front as close to the oem size so it doesnt throw the steering feel off to much and the speedo. the 80/90-10 front tire keep those really close. you got alot of options for tires with those sizes

Honda Spree and Elite 50 Forums

tyre sizes

tyre sizes

Re: tyre sizes

Re: tyre sizes

Re: tyre sizes

Re: tyre sizes

Re: tyre sizes

Re: tyre sizes

Re: tyre sizes

Re: tyre sizes