NQ50 Big Bore Kit Instructions?

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

User avatar
Candies
BMX
BMX
Posts: 28
Joined: Sat Apr 21, 2012 11:56 am
Location: Seattle, wa

NQ50 Big Bore Kit Instructions?

Post by Candies »

Hello all! I just got a 1985 Honda Spree :geekdance:. It runs great so far, however, all the roads I need to travel on are at most 35mph. My Spree, Candies, tops out at 25mph on a flat surface. I've done some research and seen that you can buy a big bore kit from chopchop001 on ebay to make it go at least 35mph. I am mechanically inclined but by no means a mechanical genius or claim to know why things work. So, my question is, how easy was it to install one of these kits, do I have to buy anything in conjunction with this kit to make it sucessful, and does the kit come with instructions? Thanx.
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3357
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: NQ50 Big Bore Kit Instructions?

Post by swimmingfree »

witch kit are you thinking of doing??? chopchop001 i thing is tazland001 on here ..
swimmingfree
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
User avatar
Candies
BMX
BMX
Posts: 28
Joined: Sat Apr 21, 2012 11:56 am
Location: Seattle, wa

Re: NQ50 Big Bore Kit Instructions?

Post by Candies »

The 48mm. Thanks, I'll look him or her up.
"Well, this fits here...like that...and this here...like that...and d***, I broke it AGAIN" hahaha
User avatar
Bear45-70
CBR1000RR
CBR1000RR
Posts: 9682
Joined: Mon Jul 23, 1973 10:24 am
Location: Union, WA.

Re: NQ50 Big Bore Kit Instructions?

Post by Bear45-70 »

Him and he is outside Vegas.
Bear 45/70
Image

'83 Aero 80 X 3
'84 Aero 80 X 3

'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3357
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: NQ50 Big Bore Kit Instructions?

Post by swimmingfree »

heres 2 and i think he has 3 kits all 48 mm and the one i cant fine has a bigger carb then stock...
swimmingfree

http://www.ebay.com/itm/Honda-Spree-Eli ... 3374dbe3ab

http://www.ebay.com/itm/Honda-Spree-Eli ... 564627f90d
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
User avatar
Candies
BMX
BMX
Posts: 28
Joined: Sat Apr 21, 2012 11:56 am
Location: Seattle, wa

Re: NQ50 Big Bore Kit Instructions?

Post by Candies »

Thanx again...will the 48 get me up to 35mph?
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3357
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: NQ50 Big Bore Kit Instructions?

Post by swimmingfree »

this one yes the other it shood
swimmingfree

http://www.ebay.com/itm/Honda-Spree-Eli ... 564627f90d
Last edited by swimmingfree on Sat Apr 21, 2012 2:02 pm, edited 1 time in total.
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
User avatar
Candies
BMX
BMX
Posts: 28
Joined: Sat Apr 21, 2012 11:56 am
Location: Seattle, wa

Re: NQ50 Big Bore Kit Instructions?

Post by Candies »

Im not seeing a difference in these kits... :newb:
"Well, this fits here...like that...and this here...like that...and d***, I broke it AGAIN" hahaha
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3357
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: NQ50 Big Bore Kit Instructions?

Post by swimmingfree »

The Stage 2 kit is a 48mm BBK with a 16*82 gear ratio upgrade. The gear ratio is what provides more top.

*This gear set will work for the elite E (SB50) but you will have to shave the secondary gear for it to fit into the bearing. This work is only required for the Elite E(SB50) and not for the spree. Your local machine shop can provide this service.
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
User avatar
Bear45-70
CBR1000RR
CBR1000RR
Posts: 9682
Joined: Mon Jul 23, 1973 10:24 am
Location: Union, WA.

Re: NQ50 Big Bore Kit Instructions?

Post by Bear45-70 »

Here is his store. Get the kit with the gears or your top speed will have minimal change.

http://stores.ebay.com/alluneed-scooter ... 4340.l2563

FYI, I think he is out of carb/intake kits right now.

Oh and the difference in the kits is that the stage 2 has the gears, which is what you want.
Bear 45/70
Image

'83 Aero 80 X 3
'84 Aero 80 X 3

'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
User avatar
Candies
BMX
BMX
Posts: 28
Joined: Sat Apr 21, 2012 11:56 am
Location: Seattle, wa

Re: NQ50 Big Bore Kit Instructions?

Post by Candies »

You know, maybe I'm jumping in too fast..Imma check for carbon buildup and loose belt to see if its just a performance issue. I think the 85 should be able to get up to 35 by itself no problem...:wink:
onna spree
Spree
Spree
Posts: 136
Joined: Fri Dec 10, 2010 10:08 pm
Location: Milport In.

Re: NQ50 Big Bore Kit Instructions?

Post by onna spree »

Nope! :sad:
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3357
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: NQ50 Big Bore Kit Instructions?

Post by swimmingfree »

wish you luck on it ... if your lucky you will get 30 but it done hurt to try... you may want to try this as well http://hondaspree.net/wiki/index.php5?t ... r_Cleaning
swimmingfree...
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
User avatar
66SIX
CB900F
CB900F
Posts: 1002
Joined: Sat Aug 14, 2010 12:38 am
Location: Las Vegas Nevada

Re: NQ50 Big Bore Kit Instructions?

Post by 66SIX »

I have the Tazz kit and re-did an old pipe
My little spree is a blast to ride
and the extra power is noticeable but don't think you will be popping wheelies .
Well small ones maybe ?
Attachments
IMG_0417.jpg
IMG_0417.jpg (70.69 KiB) Viewed 20073 times
100_1993.jpg
100_1993.jpg (188.36 KiB) Viewed 20073 times
100_1992.jpg
100_1992.jpg (115.55 KiB) Viewed 20073 times
User avatar
Candies
BMX
BMX
Posts: 28
Joined: Sat Apr 21, 2012 11:56 am
Location: Seattle, wa

Re: NQ50 Big Bore Kit Instructions?

Post by Candies »

Hahaha no wheelies for me. Im just trying to get where I need to go and go the speed limit. If you guys dont think I can get at least 30 without a kit I believe you, I am inexperienced here. I just dont want to buy the kit and it turns out to be a complete custom job nightmare.
Post Reply