Honda Spree and Elite 50 Forums

Elite, you've installed this kit, how difficult was it? Was the disassembly lengthy and did you have to jerry rig anything?

66SIX you have the stage 3 kit ??
swimmingfree

it is all bolt on and easy to do should only take a hour or so

Thank you paulpauly...I just need some assurance I guess

i bought a complete top end kit from taz and i didnt have much trouble at all and if i did i knew i could ask taz and he would explain it no problem.

How fast does your spree go now?

i bought the stock kit not the bbk but the bbk with the gears you should get 35 no problem

66SIX wrote:I have the Tazz kit and re-did an old pipe
My little spree is a blast to ride
and the extra power is noticeable but don't think you will be popping wheelies .
Well small ones maybe ?

What Intake is pictured there?

That is a standard CT intake but you need a special adapter to make it work on the spree block. Those adapters were included in a kit from Taz on eBay with a a 21mm carb, intake adpapter, intake and throttle cable.

Do you need the carb kit to make the big bore kit work?

No, but you'll want to do some intake modifications. Stock Spree intake just doesn't have what it takes. Links in my signature.