1985 Spree---Boggs Down

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

bowman2
BMX
BMX
Posts: 36
Joined: Sun May 14, 2006 11:39 pm
Contact:

1985 Spree Boss Down---Now running great

Post by bowman2 »

Thanks for the URL for the laws in the various states.
User avatar
Airplane Mechanic
Noob
Noob
Posts: 9
Joined: Fri May 26, 2006 7:21 pm
Location: Grayson, Georgia

Post by Airplane Mechanic »

I am new to the spree but when i was trying to get mine running i checked everything and couldnt figure it out. then i remembered seeing the word decarbonize in the manual and thought why not check the cylinder. i took off the head and i was shocked! the whole exhaust port was completely plugged with carbon except for a hole about equal to a 1/4 inch. i almost couldnt even tell that there was an exhaust port. so i cleaned it really good, took and fine wire brush to the top of the piston and head and except for idle (carb issue) it runs like a champ. just something else to try, good luck
bowman2
BMX
BMX
Posts: 36
Joined: Sun May 14, 2006 11:39 pm
Contact:

Exhaust

Post by bowman2 »

Thanks for the tip. Something else to check.
Post Reply