New guy top end problems.

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

User avatar
stucinthe80z
Spree
Spree
Posts: 124
Joined: Tue Jun 12, 2012 7:04 am
Location: PNW

Re: New guy top end problems.

Post by stucinthe80z »

yes clean it again it took me 5 times of ceaning befor i got it right .then she spreed to life.also you noted that you did not have a air box they acully run better with one beleive it my 2 cents worth
User avatar
Pismobear
Goped
Goped
Posts: 59
Joined: Fri Oct 05, 2012 6:03 pm
Location: Pismo Ca. USA

Re: New guy top end problems.

Post by Pismobear »

Can I use a pod filter? I don't have a factory air box.
You gotta stop, hey, whats that sound? Everybody look.. Ah whatever.


85 Honda Aero50
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3357
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: New guy top end problems.

Post by swimmingfree »

your running it with a pod filter??? if so you are running lean.... most sprees will not run wit a pod filter enless yopu tap off most of the filter or put a plug it it to restict the air going in the carb...
swimmingfree
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
User avatar
Pismobear
Goped
Goped
Posts: 59
Joined: Fri Oct 05, 2012 6:03 pm
Location: Pismo Ca. USA

Re: New guy top end problems.

Post by Pismobear »

Thanks, I am soaking now with the emulsion tube out of the body, and I will pay close attention to the details!

:thumbsup:
You gotta stop, hey, whats that sound? Everybody look.. Ah whatever.


85 Honda Aero50
User avatar
Pismobear
Goped
Goped
Posts: 59
Joined: Fri Oct 05, 2012 6:03 pm
Location: Pismo Ca. USA

Re: New guy top end problems.

Post by Pismobear »

The Spree is running the factory air filter. It runs great. My issues are with the Aero. I have rebuilt the carb and restricted it a bit to get the idea of weather it was going to work or not. It works well! I am going to get the air box cover from "Noiseguy" and start getting it running right soon. Got to get the Spree sold first.

Thanks for all the help, I couldn't have done it with this board. :thumbsup:
You gotta stop, hey, whats that sound? Everybody look.. Ah whatever.


85 Honda Aero50
User avatar
Pismobear
Goped
Goped
Posts: 59
Joined: Fri Oct 05, 2012 6:03 pm
Location: Pismo Ca. USA

Re: New guy top end problems.

Post by Pismobear »

Here is the Spree.



ImageImage
You gotta stop, hey, whats that sound? Everybody look.. Ah whatever.


85 Honda Aero50
Post Reply