Need a Flywheel Puller for 2000 Honda Elite Sa50
Moderator: Moderator
-
- BMX
- Posts: 31
- Joined: Sat Aug 04, 2012 1:56 pm
- Location: Staunton, VA
Need a Flywheel Puller for 2000 Honda Elite Sa50
Does any1 happen to have a spare flywheel puller for 94-01 honda elite sa50? or does any1 know of any way to remove the flywheel without puller or know how to make one myself if not....IM IN DESPRITE NEED BECUZ MY CRANK BEARINGS NEED CHANGED AND I CAN GET TO EM!!
Re: Need a Flywheel Puller for 2000 Honda Elite Sa50
I just use this:
http://www.harborfreight.com/46-piece-b ... 37824.html
Only $13 at HF right now (before coupons).
http://www.harborfreight.com/46-piece-b ... 37824.html
Only $13 at HF right now (before coupons).
1986 Spree w/ '87 SE50 motor
1985 Aero 50 w/ Dio motor: On Hold
1985 Aero 50 w/ Dio motor: On Hold
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: Need a Flywheel Puller for 2000 Honda Elite Sa50
Greetings:
I used that exact set to split the cases prepping for Flash 5 in Builds.
However as a flywheel puller it's a bit wobbly and tricky to set up. Great Risk of threading the M6 bolts too far into the flywheel and buggering up the Stator. Rocky Mountain Sports sells the 24mm R-Hand thread puller for Honda and many others; Screw on, Couple of twists on the bolt and POP. With the steering wheel puller: Proceed with caution.
I used that exact set to split the cases prepping for Flash 5 in Builds.
However as a flywheel puller it's a bit wobbly and tricky to set up. Great Risk of threading the M6 bolts too far into the flywheel and buggering up the Stator. Rocky Mountain Sports sells the 24mm R-Hand thread puller for Honda and many others; Screw on, Couple of twists on the bolt and POP. With the steering wheel puller: Proceed with caution.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
-
- BMX
- Posts: 31
- Joined: Sat Aug 04, 2012 1:56 pm
- Location: Staunton, VA
Re: Need a Flywheel Puller for 2000 Honda Elite Sa50
Got it! With Steering Wheel Puller!! Thanks!!!