1986 honda Elite 150d Fuel sending unit

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

DavidB
Goped
Goped
Posts: 50
Joined: Tue Mar 10, 2015 10:48 pm
Location: Renton, WA

Re: 1986 honda Elite 150d Fuel sending unit

Post by DavidB »

The silver epoxy worked for the broken traces at around 3 areas. I'll attach photos after reducing them in size.
DavidB
Goped
Goped
Posts: 50
Joined: Tue Mar 10, 2015 10:48 pm
Location: Renton, WA

Re: 1986 honda Elite 150d Fuel sending unit

Post by DavidB »

The silver epoxy worked in repairing some of the traces. Some copper lifted but I put it back down with the epoxy.
Txaero121
BMX
BMX
Posts: 28
Joined: Fri Feb 11, 2022 9:17 pm

Re: 1986 honda Elite 150d Fuel sending unit

Post by Txaero121 »

20220217_194258_copy_600x800.jpg
20220217_194258_copy_600x800.jpg (142.96 KiB) Viewed 1038 times
20220217_194306_copy_600x800.jpg
20220217_194306_copy_600x800.jpg (86.29 KiB) Viewed 1038 times
20220217_194914_copy_600x800.jpg
20220217_194914_copy_600x800.jpg (105.24 KiB) Viewed 1038 times
which silver epoxy did you use? . i have this same situation on my 1986 aero 50 going on i kinda got lucky the area where the contact was previously mounted left a outline that and the contact fell out into my hand when i was cleaning it was rusted and corrided bad it looks to be identical to yours. . so im thinking i could epoxy that down and possibly get it to work another via epoxy another option would be what your considering i found a 3 wire sender that looks like it has the same board and it makes me think could it have similar contacts thought about buying it just to use the little metal section and take my arm off mine and place it in there with the new contacts using my same board. https://www.amazon.com/uxcell-Motorcycl ... merReviews
give me a hour or so and i will upload pictures of the contacts
Txaero121
BMX
BMX
Posts: 28
Joined: Fri Feb 11, 2022 9:17 pm

Re: 1986 honda Elite 150d Fuel sending unit

Post by Txaero121 »

I'm wondering could I solder that contact back down vs using epoxy. Then could bend it up to where ever I need to make contact

EDITT~ solder does not bond to it.. :x
Post Reply