clutch bell cover over pads

1man8scoots · Post by **1man8scoots** » Sun Jun 07, 2015 11:22 pm

Sure thing buddy. Buy the correct part, simple.
I'm not as think you drunk I am?

1man8scoots · Post by **1man8scoots** » Sun Jun 07, 2015 11:35 pm

codename47 wrote:thats what naraku said and thats, what graphite claims about, his stock. just like some proof and some names. names of part numbers.

which bell do i have again?
1man8scoots wrote:Why don't you just not buy a naraku bell that is KNOWN to not fit?
duh.

Why don't you just not buy a naraku bell that's KNOWN to not fit? I still stand by my OG statement homie.

curtis966 · Post by **curtis966** » Sun Jun 07, 2015 11:41 pm

I'm pretty sure the only bell I've ever seen not fit is the naraku so the conversation is stupid. Ramble ramble ramble

Bigwheel · Post by **Bigwheel** » Sun Jun 07, 2015 11:45 pm

I don't get it, why is codename messing with a bell that doesn't fit?

Bigwheel · Post by **Bigwheel** » Mon Jun 08, 2015 10:58 am

Malossi wing bell and stage6 107mm vented bell fit perfect. I've used them both. A buddy runs a koso bell I think too that fits perfect. That was easy to solve

Xxbeejay45xx · Post by **Xxbeejay45xx** » Mon Jun 08, 2015 11:01 pm

Wow finally read this thread and WOW!! There is no measurements for a small brain. Buy the correct part and ride!!

Trafficjamz · Post by **Trafficjamz** » Tue Jun 09, 2015 4:07 pm

codename47 wrote:

I think its a worse problem having clutch pads not contacting the bell fully than, just i guess not even having a clutch bell. its part of what makes it move forward.

Having the pads not fully contact the pad is not that big of a deal.
I have the same nakaru bell on my drag race bike. The pads do peek out a little bit from the bell...but Ive never noticed any performance decrease from other bells that cover the clutchpad 100%.
In fact my nakaru bell usally out performs my prodigy bell. (I think it is because it cools down faster)

I have several different bells and clutches. I will take some pictures to see which fit best and cover the bell better.

1man8scoots · Post by **1man8scoots** » Tue Jun 09, 2015 8:42 pm

Tj to save the day.

Trafficjamz · Post by **Trafficjamz** » Thu Jun 11, 2015 1:52 am

Not sure what brand this one is....it is bigger than stock and heavier.

Trafficjamz · Post by **Trafficjamz** » Thu Jun 11, 2015 1:54 am

Prodigy Bell Over stage 6 clutch.

Trafficjamz · Post by **Trafficjamz** » Thu Jun 11, 2015 1:59 am

Nakaru bell

Unknown after market clutch

bonesv · Post by **bonesv** » Thu Jun 11, 2015 3:12 pm

Nice collection TJ. (like)

1man8scoots · Post by **1man8scoots** » Mon Jun 22, 2015 2:05 am

You have better luck than me with bell heat.

1man8scoots · Post by **1man8scoots** » Mon Jun 22, 2015 2:41 am

I tried it with the evo 2 and malossi wing bell. Yeah I can touch it but that's not for long. Maybe the other bells transfer the heat quicker but not these two.

Trafficjamz · Post by **Trafficjamz** » Mon Jun 22, 2015 1:49 pm

Yes the prodigy covers the pads 100%

The clutch bell only really gets hot when it is slipping(like when you first take off).

I don't ever really notice my clutch bell getting hot after long rides.

Honda Spree and Elite 50 Forums

clutch bell cover over pads

Re: clutch bell cover over pads

Re: clutch bell cover over pads

Re: clutch bell cover over pads

Re: clutch bell cover over pads

Re: clutch bell cover over pads

Re: clutch bell cover over pads

Re: clutch bell cover over pads

Re: clutch bell cover over pads

Re: clutch bell cover over pads

Re: clutch bell cover over pads

Re: clutch bell cover over pads

Re: clutch bell cover over pads

Re: clutch bell cover over pads

Re: clutch bell cover over pads

Re: clutch bell cover over pads