Hello!
Per the picture below, I am in need of a replacement for the nut that screws onto this bolt (circled in red). This is the assembly that hinges with the seat and holds it in. If someone could please let me know the size of the nut needed or where to find a replacement piece I would greatly appreciate it!
http://imgur.com/Q0Afb1s
1986 Honda Spree - Nut for Seat Hinge
Moderator: Moderator
-
Wheelman-111
- Moderator
- Posts: 11321
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: 1986 Honda Spree - Nut for Seat Hinge
Greetings:
I don't currently own a Spree but from experience with at least a half-dozen scooters, I can tell you that Honda-san is very fond of an M6 (6mm, 10tpc) stud and a size 10mm Hex nut.
I don't currently own a Spree but from experience with at least a half-dozen scooters, I can tell you that Honda-san is very fond of an M6 (6mm, 10tpc) stud and a size 10mm Hex nut.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
-
eclark5483
- CB900F
- Posts: 1437
- Joined: Thu Apr 14, 2016 5:15 am
- Location: Spencer Iowa
- Contact:
Re: 1986 Honda Spree - Nut for Seat Hinge
Nut size is M6x1.00. Very common size, any hardware or auto store should have them.
Re: 1986 Honda Spree - Nut for Seat Hinge
Thank you guys! I really appreciate your help.