Elite 80 speedometer problems

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

Post Reply
Zfunk
Noob
Noob
Posts: 1
Joined: Fri Jul 08, 2016 6:09 pm
Location: Oceanside, CA

Elite 80 speedometer problems

Post by Zfunk »

Hello all, first post here so thanks in advance for any information.

After hooking up the speedometer components on my 1990 elite 80, when I ride, even at very low speeds the speedo needle maxes out and shoots all the way up past any numbers, and basically stays maxed out until I stop.

I recently put in a new speedo gear in the front tire assembly, the old one was broken. When the cable is unattached at the dash, I can see the inner cable spin when I spin the front tire, so the new gear seems to be working.

I'm thinking it must be a gear problem in the dash itself, everything else seems to be functioning as it should.

Has anyone else had a similar problem or have any ideas? Should I just get a digital speedo and save myself the headache?

Thanks!
MentalJunkyard
BMX
BMX
Posts: 22
Joined: Wed Jun 29, 2016 10:24 pm
Location: Indianapolis, IN

Re: Elite 80 speedometer problems

Post by MentalJunkyard »

Did the new gear have the same number of teeth as the old one? The most logical cause I can think of would be that it is the wrong gear, and is spinning the cable too fast.
Post Reply