Af16 won't run

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

Post Reply
User avatar
52much
Spree
Spree
Posts: 110
Joined: Fri Sep 27, 2013 9:24 pm
Location: Indiana

Af16 won't run

Post by 52much »

72 cc.,24 mm Pollini,PG.Got good spark, got 110 plus compression, Got a bowl full of fuel, cranks over just fine. Won't start. Tried ether spray. Won't start. About to pull motor. Any ideas?
Image
User avatar
52much
Spree
Spree
Posts: 110
Joined: Fri Sep 27, 2013 9:24 pm
Location: Indiana

Re: Af16 won't run

Post by 52much »

:coolcruise: The only thing I know you can do to change timing is shear the flywheel key. Motor was running just fine, died, thought it was out of gas, hasn't started since. I will check key when motor is removed. Any other ideas?
User avatar
Rip_City_Spree
CB900F
CB900F
Posts: 1379
Joined: Sun Jun 13, 2010 7:47 pm

Re: Af16 won't run

Post by Rip_City_Spree »

Might need a carb cleaning. Check to make sure the jets aren't plugged. Though there is gas in the bowl you might have picked something up that is keeping fuel from going into the engine.
01 Elite SR
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
User avatar
52much
Spree
Spree
Posts: 110
Joined: Fri Sep 27, 2013 9:24 pm
Location: Indiana

Re: Af16 won't run

Post by 52much »

:coolcruise: Put a new motor in and so far it has not started. I believe it is electrical. But it had a good spark. Haven't checked spark on new motor.
Image
User avatar
52much
Spree
Spree
Posts: 110
Joined: Fri Sep 27, 2013 9:24 pm
Location: Indiana

Re: Af16 won't run

Post by 52much »

:coolcruise: Put a Honda CDI on and it started. Thanks for the help!
Image
Post Reply