Key way keeps on breaking my af16 motor
Moderator: Moderator
Key way keeps on breaking my af16 motor
What could be the reason why my key way always slips out the groove it sits in or anybody got any tips on installing a key way
Re: Key way keeps on breaking my af16 motor
Retaining nut too loose.?
Engine backfire.?
Does the Woodruff key split ?
Engine backfire.?
Does the Woodruff key split ?
RideRed
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
- Wheelman-111
- Moderator
- Posts: 11319
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: Key way keeps on breaking my af16 motor
Greetings:
Torque on the retaining nut should keep the flywheel from spinning, not the woodruff key. Are the surfaces smooth and true? Are you applying the specified torque?
Torque on the retaining nut should keep the flywheel from spinning, not the woodruff key. Are the surfaces smooth and true? Are you applying the specified torque?
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH