The line that connects oil pump spigot to carb/manifold barb. Swapping oilpump from 87 se to 93 sr and line is too short.
Got some similar sized vacuum tubing from Vatozone, but its a loose fit and feel hesitant to use vacuum line for oil. At least for anything other than temporary solution..
Anyone have recommendations of where I could find suitable longer oil line, local preferably?
Vatozone recommended Napa, haven't looked there yet.
Tiny Oil Feed Line - Source??
Moderator: Moderator
- burnt_toast
- Veteran OG
- Posts: 3592
- Joined: Sat Jul 31, 2004 8:00 pm
- Location: Atlanta, GA
Tiny Oil Feed Line - Source??
projects galore
- burnt_toast
- Veteran OG
- Posts: 3592
- Joined: Sat Jul 31, 2004 8:00 pm
- Location: Atlanta, GA
Re: Tiny Oil Feed Line - Source??
might buy a roll of this and split up, if anyone needs some. looks like good stuff
https://www.usplastic.com/catalog/files ... s/FUEL.pdf
https://www.usplastic.com/catalog/files ... s/FUEL.pdf
projects galore
-
- Veteran OG
- Posts: 3639
- Joined: Tue May 22, 2007 8:10 pm
- Location: North of Seattle, WA
Re: Tiny Oil Feed Line - Source??
You can get yellow Tygon tubing (or equivalent) at hobby shops, chainsaw shops and mower section of good hardware stores. Tygon's yellow tube is safe for gasoline/oil.
Sizes: 3/32, 1/8, 5/32 in the link below. OEM oil line is 3.5mm so 1/8" (3.1mm) is a bit smaller and 5/32 (~4mm) won't stay on the fitting w/o a clamp.
Example link:
https://dubro.com/products/tygon-gasoli ... 7880801991
Sizes: 3/32, 1/8, 5/32 in the link below. OEM oil line is 3.5mm so 1/8" (3.1mm) is a bit smaller and 5/32 (~4mm) won't stay on the fitting w/o a clamp.
Example link:
https://dubro.com/products/tygon-gasoli ... 7880801991
-
- Elite
- Posts: 331
- Joined: Mon Feb 01, 2016 11:57 pm
- Location: Florida
Re: Tiny Oil Feed Line - Source??
I ordered mine from a place online called 4 into 1. Also available on Ebay.
- burnt_toast
- Veteran OG
- Posts: 3592
- Joined: Sat Jul 31, 2004 8:00 pm
- Location: Atlanta, GA
Re: Tiny Oil Feed Line - Source??
Cool. Was trying to stay local for less downtime on this one
Tried:
Autozone... failed
Advance Auto... failed
Lowes (weedeater gas line looked promising, but too small!)... failed
Walmart (fishtank tubing, close size but ultimately not oil worthy)... failed
and then! God said let there be NAPA, and there was NAPA! And all was GOOD
In case anyone else needs to find some:
1/8" Fuel Line Hose - P/N: H-174 $1.49per ft. and 12in is plenty for 89+ S
way to go NAPA
Tried:
Autozone... failed
Advance Auto... failed
Lowes (weedeater gas line looked promising, but too small!)... failed
Walmart (fishtank tubing, close size but ultimately not oil worthy)... failed
and then! God said let there be NAPA, and there was NAPA! And all was GOOD
In case anyone else needs to find some:
1/8" Fuel Line Hose - P/N: H-174 $1.49per ft. and 12in is plenty for 89+ S
way to go NAPA
projects galore
Re: Tiny Oil Feed Line - Source??
I've used common clear vinyl line for this hose... available at most hardware stores.
This doesn't work well for gasoline... it will harden... I've not had this problem on oil lines.
This doesn't work well for gasoline... it will harden... I've not had this problem on oil lines.
Admin, Hondaspree.net
Buy air filters and gaskets here (Ebay): http://stores.ebay.com/noiseguysstore
Buy air filters and gaskets here (Amazon): www.amazon.com/shops/spreepower
Buy a t-shirt here: https://teespring.com/stores/spree-powersport-products
Buy air filters and gaskets here (Ebay): http://stores.ebay.com/noiseguysstore
Buy air filters and gaskets here (Amazon): www.amazon.com/shops/spreepower
Buy a t-shirt here: https://teespring.com/stores/spree-powersport-products
Re: Tiny Oil Feed Line - Source??
NAPA know-how.
RideRed
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"