Page 1 of 1
Stroker pipe jiso copy
Posted: Thu Jul 06, 2017 3:17 am
by Strokers
Hello all
I got a sym dd50 motor on my arnada and im running a 56mm w/c and i just bought a stroker pipe 125cc jiso and when i put it on it idles but it wont move. played with weights and clutch springs need help what am i doing wrong? thanks
Re: Stroker pipe jiso copy
Posted: Mon Jul 10, 2017 4:55 pm
by burnt_toast
what do you mean exactly? what's carb setup.
does it have a belt?? won't move without one..
or is it just bogging out with any throttle. need more infos
Re: Stroker pipe jiso copy
Posted: Tue Jul 11, 2017 7:27 pm
by Strokers
33 carb kihien 55 pilot 160 jet
Yes it have a belt
It boggs like to much fuel and wont move even when i drop my jetting down to 140 jet it does the same
I have a video but i dont think it would able post it here
Thanks
Re: Stroker pipe jiso copy
Posted: Tue Jul 11, 2017 7:44 pm
by Wheelman-111
Greetings:
If you're having trouble getting the RPM up to take off, it's not the main jet you need to swap. It's the Pilot. The bogging is equally likely to be due a mix that is to too lean as it is too rich. Check the spark plug.