Stroker pipe jiso copy

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

Post Reply
Strokers
Noob
Noob
Posts: 2
Joined: Thu Jul 06, 2017 2:02 am
Location: Hawaii

Stroker pipe jiso copy

Post by Strokers »

Hello all
I got a sym dd50 motor on my arnada and im running a 56mm w/c and i just bought a stroker pipe 125cc jiso and when i put it on it idles but it wont move. played with weights and clutch springs need help what am i doing wrong? thanks
User avatar
burnt_toast
Veteran OG
Veteran OG
Posts: 3591
Joined: Sat Jul 31, 2004 8:00 pm
Location: Atlanta, GA

Re: Stroker pipe jiso copy

Post by burnt_toast »

what do you mean exactly? what's carb setup.

does it have a belt?? won't move without one..

or is it just bogging out with any throttle. need more infos
projects galore :nerd:
Strokers
Noob
Noob
Posts: 2
Joined: Thu Jul 06, 2017 2:02 am
Location: Hawaii

Re: Stroker pipe jiso copy

Post by Strokers »

33 carb kihien 55 pilot 160 jet
Yes it have a belt

It boggs like to much fuel and wont move even when i drop my jetting down to 140 jet it does the same

I have a video but i dont think it would able post it here

Thanks
User avatar
Wheelman-111
Moderator
Moderator
Posts: 11319
Joined: Wed Oct 22, 2008 5:09 pm
Location: Deepinnaharta, Texas

Re: Stroker pipe jiso copy

Post by Wheelman-111 »

Greetings:

If you're having trouble getting the RPM up to take off, it's not the main jet you need to swap. It's the Pilot. The bogging is equally likely to be due a mix that is to too lean as it is too rich. Check the spark plug.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Post Reply