AF18/AF16e Transmission Bearing Part Numbers

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

Post Reply
User avatar
NZHonda
Spree
Spree
Posts: 161
Joined: Thu Mar 01, 2012 8:53 pm
Location: New Zealand

AF18/AF16e Transmission Bearing Part Numbers

Post by NZHonda »

I want to replace all of the bearings in my transmission for my up coming build.

What are the part numbers?

Does anyone have any cross referenced numbers that I can get from a good bearing supplier? What about a picture/parts manual with them all in it?

Last but no least, how about the seals that go on the axle?

Thanks.
Honda AF28 Dio ZX - Malossi 72cc
Honda DJ1R project
mousewheels
Veteran OG
Veteran OG
Posts: 3639
Joined: Tue May 22, 2007 8:10 pm
Location: North of Seattle, WA

Re: AF18/AF16e Transmission Bearing Part Numbers

Post by mousewheels »

NZHonda wrote:I want to replace all of the bearings in my transmission for my up coming build.
What are the part numbers? Does anyone have any cross referenced numbers that I can get from a good bearing supplier? What about a picture/parts manual with them all in it?
The Honda parts fiche has all part numbers as well as generic replacement numbers (62xx series for bearings in the transmission)

For tech info and online sales here's some links, but there's many other sources. Locally you may have some excellent suppliers.

Timkin - online bearing spec data

VXB - online bearing sales
Last but no least, how about the seals that go on the axle?
The seal dimensions are listed in the parts fiche as 'seal id, seal od, thickness' - eg '17x30x5'
Bearings_Seals_only.png
Bearings_Seals_only.png (202.35 KiB) Viewed 5511 times
Bearings_Seals_Crankcase..png
Bearings_Seals_Crankcase..png (171.87 KiB) Viewed 5511 times
User avatar
NZHonda
Spree
Spree
Posts: 161
Joined: Thu Mar 01, 2012 8:53 pm
Location: New Zealand

AF18/AF16e Transmission Bearing Part Numbers List

Post by NZHonda »

An old thread but I didn't need new bearings until now for my DJ1R 125cc stroker project. This thread serves as a great reference for anyone changing there bearings and seals. In the end Paulpauly7 pulled the bearings out and had them matched but they are as follows: (Note single bearing transmission cover)

Bearings:
6203LLU QTY2
6201LLU QTY1
6202LLU (sealed) QTY1

Seals:
17 x 30 x 5mm QTY1
24 x 40 x 7mm QTY1

Turns out the small 17x30x5mm was harder to get. Most engineering shops had x7mm not x5mm.

Should run very smoothly when it's all back together.
Honda AF28 Dio ZX - Malossi 72cc
Honda DJ1R project
Post Reply