Gasket material type/stencils wanted (afo5e
Moderator: Moderator
Gasket material type/stencils wanted (afo5e
Does anybody know the gasket type used for the base of the engine barrel? I'd buy a set online but currency conversion plus shipping means cheapest one I can buy is around 70$ a set. So trying to buy material local and cut it out myself. Thanks.
I own a Honda Eve and a Honda Nifty Fifty.
The Eve has a wiring harness, coils, throttle control and a starter motor from a nifty, since relying on kickstart isn't fun.
The Eve has a wiring harness, coils, throttle control and a starter motor from a nifty, since relying on kickstart isn't fun.
Re: Gasket material type/stencils wanted (afo5e
You cut a hole in notebook paper and put it over the top. Trace the outer edge and port bump outs. Trim until it's right; add back using tape and paper. Trace final pattern onto commercially-available bulk gasket material (check local auto stores), cut with razor blade, and install. Whole process should take less than 1 hr.
Most of Honda gaskets, IIRC, use 0.5mm material. The automotive stuff will likely be 0.7mm, which is close enough for what you're using it for.
Most of Honda gaskets, IIRC, use 0.5mm material. The automotive stuff will likely be 0.7mm, which is close enough for what you're using it for.
Admin, Hondaspree.net
Buy air filters and gaskets here (Ebay): http://stores.ebay.com/noiseguysstore
Buy air filters and gaskets here (Amazon): www.amazon.com/shops/spreepower
Buy a t-shirt here: https://teespring.com/stores/spree-powersport-products
Buy air filters and gaskets here (Ebay): http://stores.ebay.com/noiseguysstore
Buy air filters and gaskets here (Amazon): www.amazon.com/shops/spreepower
Buy a t-shirt here: https://teespring.com/stores/spree-powersport-products
Re: Gasket material type/stencils wanted (afo5e
Thanks will give it a go.
I own a Honda Eve and a Honda Nifty Fifty.
The Eve has a wiring harness, coils, throttle control and a starter motor from a nifty, since relying on kickstart isn't fun.
The Eve has a wiring harness, coils, throttle control and a starter motor from a nifty, since relying on kickstart isn't fun.
-
- Noob
- Posts: 15
- Joined: Tue Oct 31, 2017 3:57 pm
- Location: Boulder
Re: Gasket material type/stencils wanted (afo5e
Here's a PNG file of the Spree gaskets that I made. I drew them up in Illustrator, and cut them with my plotter out of sheet gasket material... Let me know if you need it in any other format.
http://www.ericpatzer.com/SpreeGaskets.png
http://www.ericpatzer.com/SpreeGaskets.png
Re: Gasket material type/stencils wanted (afo5e
Do I just print no formatting?herbiedriver2 wrote:Here's a PNG file of the Spree gaskets that I made. I drew them up in Illustrator, and cut them with my plotter out of sheet gasket material... Let me know if you need it in any other format.
http://www.ericpatzer.com/SpreeGaskets.png
I own a Honda Eve and a Honda Nifty Fifty.
The Eve has a wiring harness, coils, throttle control and a starter motor from a nifty, since relying on kickstart isn't fun.
The Eve has a wiring harness, coils, throttle control and a starter motor from a nifty, since relying on kickstart isn't fun.
Re: Gasket material type/stencils wanted (afo5e
That link just goes to a blank site and when saving the image, it's black too.herbiedriver2 wrote:Here's a PNG file of the Spree gaskets that I made. I drew them up in Illustrator, and cut them with my plotter out of sheet gasket material... Let me know if you need it in any other format.
http://www.ericpatzer.com/SpreeGaskets.png
I own a Honda Eve and a Honda Nifty Fifty.
The Eve has a wiring harness, coils, throttle control and a starter motor from a nifty, since relying on kickstart isn't fun.
The Eve has a wiring harness, coils, throttle control and a starter motor from a nifty, since relying on kickstart isn't fun.
Re: Gasket material type/stencils wanted (afo5e
Cheapest local I can find is 40 bucks for half a square metre oh crap. Still cheaper than a kit, and there's more material than I need so I guess it'll have to do.
I own a Honda Eve and a Honda Nifty Fifty.
The Eve has a wiring harness, coils, throttle control and a starter motor from a nifty, since relying on kickstart isn't fun.
The Eve has a wiring harness, coils, throttle control and a starter motor from a nifty, since relying on kickstart isn't fun.