Carb problems
Moderator: Moderator
-
- Noob
- Posts: 3
- Joined: Wed Apr 11, 2018 5:33 pm
- Location: Washington
Carb problems
I have been working on small motors for years and this one has me stumped. This is for a 87 spree. When I put the throttle slide in the carb it seats fine. When I twist the throttle the throttle slide twists inside the carb which makes it not seat right. Took the carb off my other 87 and put it together and worked fine. Put the car in question on the other bike and it did the same thing. Has anyone ever had this happen? Is there a fix?
Re: Carb problems
It must have sheared off the nub inside the slide bore that keeps it aligned.
I guess we should establish that itÔÇÖs an oem carburetor we are talking about?
I guess we should establish that itÔÇÖs an oem carburetor we are talking about?
Honda Elite SR
Honda Elite-Dio ZX
Dio ZX Headlight/Disc Brake Mod: http://hondaspree.net/phpBB3/viewtopic.php?t=30861
Honda Elite-Dio ZX
Dio ZX Headlight/Disc Brake Mod: http://hondaspree.net/phpBB3/viewtopic.php?t=30861
-
- Noob
- Posts: 3
- Joined: Wed Apr 11, 2018 5:33 pm
- Location: Washington
Re: Carb problems
Yes its OEM. Now that I look at it it is smooth on the inside. Can this be fixed? Or ir am I replacing the carb. Hard to find an OEM carb. Any suggestions on an aftermarket carb.
-
- Noob
- Posts: 3
- Joined: Wed Apr 11, 2018 5:33 pm
- Location: Washington
Re: Carb problems
Ok the tab slid out. I was able to tap it back in and it works just fine.
Re: Carb problems
Firebug560 wrote:Ok the tab slid out. I was able to tap it back in and it works just fine.
- Attachments
-
- Thumbs up.jpg (17.56 KiB) Viewed 2623 times
RideRed
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"