Handlebar/Dash overhaul?
Moderator: Moderator
Handlebar/Dash overhaul?
Hi guys, hoping someone can chime in here and maybe post some pics of something similar to the idea I have.
The outer handlebar cover on my Elite is pretty messed up. Cracked/missing pieces, etc. I was considering perhaps ditching both covers and going with a fully custom dash. Probably would use a TrailTech Vapor for tach/speed/temp, with the attachment for indicator lights. Then add custom blinkers and a headlight, and replace/remount the various switches.
If I were to do this, could I use the original handlebars, or would I need to get an aftermarket set? Is it even possible to switch to an aftermarket set?
If something like this is even possible, could anyone else who has done something similar offer any advice and/or pics of your setup? I’d love some inspiration!
The outer handlebar cover on my Elite is pretty messed up. Cracked/missing pieces, etc. I was considering perhaps ditching both covers and going with a fully custom dash. Probably would use a TrailTech Vapor for tach/speed/temp, with the attachment for indicator lights. Then add custom blinkers and a headlight, and replace/remount the various switches.
If I were to do this, could I use the original handlebars, or would I need to get an aftermarket set? Is it even possible to switch to an aftermarket set?
If something like this is even possible, could anyone else who has done something similar offer any advice and/or pics of your setup? I’d love some inspiration!
2001 Elite S (Derestricted)
Arrow Exhaust
Polini Variator
6.9g rollers
ZX Trans
1.5k Contra, 4k shoe springs
16/42 Gears
Arrow Exhaust
Polini Variator
6.9g rollers
ZX Trans
1.5k Contra, 4k shoe springs
16/42 Gears
Re: Handlebar/Dash overhaul?
Sounds like an interesting project.
Anyone got some advice?
Anyone got some advice?
Re: Handlebar/Dash overhaul?
Yeah. Makes me miss my machine shop days, when I could make just about anything. I’m gonna take all the panels off this weekend when I install the boatload of parts that have come in over the last week, so I’ll be able to get a better idea of what I’m working with then. Would love to hear from anyone else who’s done something similar though!
2001 Elite S (Derestricted)
Arrow Exhaust
Polini Variator
6.9g rollers
ZX Trans
1.5k Contra, 4k shoe springs
16/42 Gears
Arrow Exhaust
Polini Variator
6.9g rollers
ZX Trans
1.5k Contra, 4k shoe springs
16/42 Gears
Re: Handlebar/Dash overhaul?
So I found this as Scooter Swap Shop:
https://scooterswapshop.com/products/ho ... -bar-clamp
Leave it to them to have exactly what I need! It’s pricey but having previously worked in manufacturing and knowing what it takes to make something like that, seems like a good buy.
https://scooterswapshop.com/products/ho ... -bar-clamp
Leave it to them to have exactly what I need! It’s pricey but having previously worked in manufacturing and knowing what it takes to make something like that, seems like a good buy.
2001 Elite S (Derestricted)
Arrow Exhaust
Polini Variator
6.9g rollers
ZX Trans
1.5k Contra, 4k shoe springs
16/42 Gears
Arrow Exhaust
Polini Variator
6.9g rollers
ZX Trans
1.5k Contra, 4k shoe springs
16/42 Gears
-
- Veteran OG
- Posts: 3639
- Joined: Tue May 22, 2007 8:10 pm
- Location: North of Seattle, WA
Re: Handlebar/Dash overhaul?
Run a search on this site for 'handlebar stem'
A lot of folks have used BMX handebar stems with a shim to make up for the Honda's smaller fork tube.
A lot of folks have used BMX handebar stems with a shim to make up for the Honda's smaller fork tube.
-
- Veteran OG
- Posts: 3639
- Joined: Tue May 22, 2007 8:10 pm
- Location: North of Seattle, WA
Re: Handlebar/Dash overhaul?
Also, there are examples in the Scooter Showcase.
Sadly photos have been lost over time due to external photo hosting changes.
One I liked is below:
Sadly photos have been lost over time due to external photo hosting changes.
One I liked is below:
Re: Handlebar/Dash overhaul?
Mouse, that one looks sick! I love the painted/powder coated frame and lack of body panels. I’ll have to look in the scooter showcase as you suggested for more detailed views of the handlebars.
2001 Elite S (Derestricted)
Arrow Exhaust
Polini Variator
6.9g rollers
ZX Trans
1.5k Contra, 4k shoe springs
16/42 Gears
Arrow Exhaust
Polini Variator
6.9g rollers
ZX Trans
1.5k Contra, 4k shoe springs
16/42 Gears
-
- Veteran OG
- Posts: 3639
- Joined: Tue May 22, 2007 8:10 pm
- Location: North of Seattle, WA
Re: Handlebar/Dash overhaul?
I just found R1's "Victoria's Secret' thread its huge. He's using aftermarket forks, so the headset may be different - but it looks great. Also check out his bars and Vapor install.
Link (Scroll down a bit from where the link starts for the pics..)
http://www.hondaspree.net/phpBB3/viewto ... 80#p297104
-- Pic copied to your thread for readers ease.
Link (Scroll down a bit from where the link starts for the pics..)
http://www.hondaspree.net/phpBB3/viewto ... 80#p297104
-- Pic copied to your thread for readers ease.
Re: Handlebar/Dash overhaul?
Yes! That’s exactly what I was looking for. I was thinking about possibly trying to cut the stock speedo out so I could fit the trailtech in there but still keep the fuel gauge/odometer, but this looks pretty slick! Any idea what those clamps that hold the brakes/switches are and where I could get some?
2001 Elite S (Derestricted)
Arrow Exhaust
Polini Variator
6.9g rollers
ZX Trans
1.5k Contra, 4k shoe springs
16/42 Gears
Arrow Exhaust
Polini Variator
6.9g rollers
ZX Trans
1.5k Contra, 4k shoe springs
16/42 Gears
-
- Veteran OG
- Posts: 3639
- Joined: Tue May 22, 2007 8:10 pm
- Location: North of Seattle, WA
Re: Handlebar/Dash overhaul?
I've seen the TT installed into the dash, but it takes up most of the room. Maybe there's room for an aftermarket fuel gauge... Someone may have an example, I've not been around much here in the last few years. Here's an example custom dash install a member fabbed:... I was thinking about possibly trying to cut the stock speedo out so I could fit the trailtech in there but still keep the fuel gauge/odometer, but this looks pretty slick!
You can use Spree left/right control assemblies. Very similar controls are used on many of the Honda 80's scooters and peds, shop for a good deal. The controls have built in clamps. The control in the photo below is from an '84 Gyro (NN50) and shown slipped over a mountain bike bar.ny idea what those clamps that hold the brakes/switches are and where I could get some?