Elite 50 won't crank over

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

Post Reply
mike8038
Noob
Noob
Posts: 2
Joined: Wed Jul 25, 2018 12:14 pm

Elite 50 won't crank over

Post by mike8038 »

I can add power to the yellow with red stripe at the starter relay.then it will start. Is there another safety switch,that would make the starter not engage.
mike8038
Noob
Noob
Posts: 2
Joined: Wed Jul 25, 2018 12:14 pm

Re: Elite 50 won't crank over

Post by mike8038 »

Elite 50 won't crank over. Add power to the yellow with red stripe at starter relay starts and runs. What should I check.
User avatar
vintagegarage
Elite
Elite
Posts: 815
Joined: Tue Jun 23, 2015 7:03 pm
Location: Florida

Re: Elite 50 won't crank over

Post by vintagegarage »

Each brake lever mount has a switch built into it that works when you squeeze the brake lever. Squeeze either brake lever when you press the starter button and report back what happens.
mousewheels
Veteran OG
Veteran OG
Posts: 3639
Joined: Tue May 22, 2007 8:10 pm
Location: North of Seattle, WA

Re: Elite 50 won't crank over

Post by mousewheels »

vintagegarage has it covered.

Here's a diagram of the circuit. I highlighted the alternate circuit path you created by jumpering +vbatt to relay yellow/red stripe wire.

StarterRelay_Jumper.JPG
StarterRelay_Jumper.JPG (46.07 KiB) Viewed 2201 times
Post Reply