Page 1 of 1
Elite 50 won't crank over
Posted: Wed Jul 25, 2018 2:03 pm
by mike8038
I can add power to the yellow with red stripe at the starter relay.then it will start. Is there another safety switch,that would make the starter not engage.
Re: Elite 50 won't crank over
Posted: Wed Jul 25, 2018 2:53 pm
by mike8038
Elite 50 won't crank over. Add power to the yellow with red stripe at starter relay starts and runs. What should I check.
Re: Elite 50 won't crank over
Posted: Wed Jul 25, 2018 5:10 pm
by vintagegarage
Each brake lever mount has a switch built into it that works when you squeeze the brake lever. Squeeze either brake lever when you press the starter button and report back what happens.
Re: Elite 50 won't crank over
Posted: Thu Aug 02, 2018 10:19 am
by mousewheels
vintagegarage has it covered.
Here's a diagram of the circuit. I highlighted the alternate circuit path you created by jumpering +vbatt to relay yellow/red stripe wire.
- StarterRelay_Jumper.JPG (46.07 KiB) Viewed 2235 times