SB50 Stator

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

Post Reply
Talontsi
Noob
Noob
Posts: 1
Joined: Mon Jul 30, 2018 9:50 am

SB50 Stator

Post by Talontsi »

I recently purchased a 1990 Elite E Sb50. It ran good for the first couple of days then out of nowhere lost spark. After trouble shooting and swapping known good parts from my NQ50 I have determined that the stator is bad. I am having a hard time finding a replacement stator. I am also having a hard time finding information of any stators that I could possibly use. Is there any other stator out there that will fit? Thanks for any help.
mousewheels
Veteran OG
Veteran OG
Posts: 3639
Joined: Tue May 22, 2007 8:10 pm
Location: North of Seattle, WA

Re: SB50 Stator

Post by mousewheels »

A stator from a 86/87 NQ50 Spree might work. Connectors, wire colors are the same. Electrical resistance specs in the Service Manual are very similar.

-- Why not the early Spree stator?
In our Spree/SB50 compatibility thread, we noted a shaft size difference between early (84/85) Sprees vs 86-87 Spree and Elite SB50. The shaft size apparently required the stator inner hole size to increase.

Link: http://www.hondaspree.net/phpBB3/viewto ... 15#p118706
Post Reply