Electric Starter Wiring for 1986 Aero 50

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

Post Reply
billives
Noob
Noob
Posts: 9
Joined: Wed Apr 03, 2019 6:16 pm

Electric Starter Wiring for 1986 Aero 50

Post by billives »

Hi, I picked up my 1st scooter, needs lots of work, and I'm non-mechanical. The starter on my Aero does not work, brake and all switches and engaged on per manual. I noticed 1 wire is free as can see on attached picture. Where does it need to attach to, and how?
Thanks! Bill
Attachments
wiring.jpg
wiring.jpg (115.02 KiB) Viewed 5607 times
User avatar
Meatball
CB900F
CB900F
Posts: 2320
Joined: Sat Jun 04, 2016 10:45 am
Location: seattle

Re: Electric Starter Wiring for 1986 Aero 50

Post by Meatball »

Im not familiar with the Aero enough to pinpoint where on the scoot this spot is...is it up at the handbrake? Starter? Ignition? Alternator? Heres the manual for the 85’ which should shed some light. Section 15 has the wiring diagram and all wires are color coded. Hope this helps!

http://www.hondaspree.net/other/Aero50_SM_85.pdf
I need to find some new haters...the ones I have are starting to like me.
billives
Noob
Noob
Posts: 9
Joined: Wed Apr 03, 2019 6:16 pm

Re: Electric Starter Wiring for 1986 Aero 50

Post by billives »

THanks Meatball. I still can't figure out where the loose wire goes. I don't want to blow any fuses or short anything. Also, this is by the throttle. On same piece with run/stop switch.
User avatar
Meatball
CB900F
CB900F
Posts: 2320
Joined: Sat Jun 04, 2016 10:45 am
Location: seattle

Re: Electric Starter Wiring for 1986 Aero 50

Post by Meatball »

GREEN is GROUND. Basically every component will have some sort of ground wire to it. LOOK AT PICTURE. The start button has a GREEN & YELLOW/RED STRIPE to it. From your picture it seems that is correct and connected.

However, the RUN/STOP switch needs a GREEN & BLACK/WHITE STRIPE....see picture again. So, the loose wire goes to the RUN/STOP switch. Without it being connected, its an open loop and your scooter will not start.

Exactly WHERE does the wire connect, you ask? Its gotta be somewhere at the RUN/STOP button area. Look around...there isnt always a handy screw to attach. Sometimes connections have bullet plugs, soldered or simply jammed into a pinch connection.
D756A693-1F53-414F-A1AC-E288A8DF8C6C.jpeg
D756A693-1F53-414F-A1AC-E288A8DF8C6C.jpeg (86.67 KiB) Viewed 5584 times
I need to find some new haters...the ones I have are starting to like me.
User avatar
Meatball
CB900F
CB900F
Posts: 2320
Joined: Sat Jun 04, 2016 10:45 am
Location: seattle

Re: Electric Starter Wiring for 1986 Aero 50

Post by Meatball »

The switch is all one piece to the plug and the wires are not intended to be removed. Seems as if you need to solder the connection back together or find a replacement for entire switch assembly. Ebay is a place to look if you cant repair.

Honda part# 35150-GN2-671

.
A3E84944-7D98-4CCC-B11A-03980E15456C.jpeg
A3E84944-7D98-4CCC-B11A-03980E15456C.jpeg (43.92 KiB) Viewed 5584 times
I need to find some new haters...the ones I have are starting to like me.
billives
Noob
Noob
Posts: 9
Joined: Wed Apr 03, 2019 6:16 pm

Re: Electric Starter Wiring for 1986 Aero 50

Post by billives »

Thanks Meatball I'll try it after work.
billives
Noob
Noob
Posts: 9
Joined: Wed Apr 03, 2019 6:16 pm

Re: Electric Starter Wiring for 1986 Aero 50

Post by billives »

Thanks Meatball I'll try it after work.
billives
Noob
Noob
Posts: 9
Joined: Wed Apr 03, 2019 6:16 pm

Re: Electric Starter Wiring for 1986 Aero 50

Post by billives »

Still not working. Could it be the other end of wiring?
User avatar
Meatball
CB900F
CB900F
Posts: 2320
Joined: Sat Jun 04, 2016 10:45 am
Location: seattle

Re: Electric Starter Wiring for 1986 Aero 50

Post by Meatball »

It certainly COULD be 50 different things.
I need to find some new haters...the ones I have are starting to like me.
Horseracebill
Noob
Noob
Posts: 3
Joined: Fri Dec 04, 2020 5:22 pm

Re: ignition plate for 1986 Aero 50

Post by Horseracebill »

1986 Honda Aero 50 ignition plate
Post Reply