I have a 87 spree for 6 months.
Ran great when first purchased, lately its starting to runs like crap.
Funny thing, When I pull in the rear brake lever it runs a little better.
Anybody know why this happens.
87 spree running issues
Moderator: Moderator
Re: 87 spree running issues
Your exhaust pipe may be leaking at the cylinder connection. The carburetor may need a good cleaning. The air filter might have finally disintegrated. Check the condition of the spark plug and inspect the cap for tight connection to it. You could have some leaky gaskets or hoses.
Let us know what you find. Stay away from cheap aftermarket replacement parts until you diagnose the problem(s).
Let us know what you find. Stay away from cheap aftermarket replacement parts until you diagnose the problem(s).
Honda Elite SR
Honda Elite-Dio ZX
Dio ZX Headlight/Disc Brake Mod: http://hondaspree.net/phpBB3/viewtopic.php?t=30861
Honda Elite-Dio ZX
Dio ZX Headlight/Disc Brake Mod: http://hondaspree.net/phpBB3/viewtopic.php?t=30861
-
- Noob
- Posts: 6
- Joined: Mon Apr 01, 2019 3:36 pm
Re: 87 spree running issues
No exhaust leaks, Air filter is fine, Plug is OK, Clean fuel.
I will give the carb a good cleaning tonight.
Why does the engine run better when I pull the brake lever ?
I will give the carb a good cleaning tonight.
Why does the engine run better when I pull the brake lever ?
Re: 87 spree running issues
It could be corrosion in one of the electrical connections that gets better when the brake light circuit is in use? Maybe a ground connection?
Honda Elite SR
Honda Elite-Dio ZX
Dio ZX Headlight/Disc Brake Mod: http://hondaspree.net/phpBB3/viewtopic.php?t=30861
Honda Elite-Dio ZX
Dio ZX Headlight/Disc Brake Mod: http://hondaspree.net/phpBB3/viewtopic.php?t=30861
- Wheelman-111
- Moderator
- Posts: 11319
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: 87 spree running issues
Greetings:
Bones is onto something! Hopefully the fouled ground or connection doesn't require stripping ALL the plastics to find.
Bones is onto something! Hopefully the fouled ground or connection doesn't require stripping ALL the plastics to find.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
-
- Noob
- Posts: 6
- Joined: Mon Apr 01, 2019 3:36 pm
Re: 87 spree running issues
Finally found the issue.
I was running it without the starter.
I put the old starter back in even though it it doesn't work and the bike runs awesome.
I guess the wiring needs to be complete to make it runs.
I was running it without the starter.
I put the old starter back in even though it it doesn't work and the bike runs awesome.
I guess the wiring needs to be complete to make it runs.
Re: 87 spree running issues
Have yet to start my 87 Spree. Got spark, New piston and rings, got fuel....no run?
- vintagegarage
- Elite
- Posts: 815
- Joined: Tue Jun 23, 2015 7:03 pm
- Location: Florida
Re: 87 spree running issues
Have a look at this discussion.. :
http://hondaspree.net/phpBB3/viewtopic.php?f=3&t=32935
Please report back if this is the problem. If it isn't let us know.. much appreciated.
http://hondaspree.net/phpBB3/viewtopic.php?f=3&t=32935
Please report back if this is the problem. If it isn't let us know.. much appreciated.