Brass tube in bowl... Air Screw?

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

Post Reply
99BlueBlazer
Noob
Noob
Posts: 4
Joined: Sat Aug 08, 2020 7:03 pm

Brass tube in bowl... Air Screw?

Post by 99BlueBlazer » Tue Aug 11, 2020 7:05 pm

Help me understand what this brass tube on the carb of my 87 Elite 50 does (red arrow in pic). It is the one path I can’t seem to verify if it is still blocked or not. It looks like it would allow fuel up from the bowl and would be controlled by the air screw.
Attachments
3058CD76-C1F3-423D-8C34-DF2502EE47D4.jpeg
3058CD76-C1F3-423D-8C34-DF2502EE47D4.jpeg (313.92 KiB) Viewed 115 times

User avatar
motormike
Moderator
Moderator
Posts: 4977
Joined: Wed Dec 29, 2010 10:58 pm
Location: Nashville, TN.

Re: Brass tube in bowl... Air Screw?

Post by motormike » Tue Aug 11, 2020 11:22 pm

Your understanding is correct.
That tube leads directly to the pilot jet.
The "air screw" allows air intake from the filter side of the carb throat,
which in turn allows fuel to be pulled into the tube and through the pilot jet into the throat
of the carb adjacent to the main jet.
When you spray a burst of carb-cleaner from a spray can into that tube,
flow should be visible in the carb throat.
ALL of that circuit needs to be open to function properly.
RideRed
OH-ARRR Racing
#53 Gyro

<Hondas>
<Gyro S><Helix><XL75><NN50M Gyro><NU50 Urban>
..Trooper...Buzby...Jon-Boy...Blooper
Yamahas'93 Jog><'13 Majesty><RD60>

"Live Large - Ride Small"

Post Reply