NCY Shock and tree stem Torque value for Elite Drum to Disk Conversion?

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

Post Reply
dextermax
Noob
Noob
Posts: 7
Joined: Wed Jul 15, 2020 5:36 pm

NCY Shock and tree stem Torque value for Elite Drum to Disk Conversion?

Post by dextermax »

For my Honda Elite Front Drum brake to Disk brake conversion, I have the NCY Triple tree stem and front legs / gas shocks struts.

Two questions:

1. How far should I insert the shocks / legs / struts in to the tree?
----------There are two allen bolts, and on the legs there is one notch at the top. i was thinking that the top notch on the legs should line up with top bolt (there are two bolts on each side)

2. How much should I torque these bolts?

Thanks!
User avatar
bonesv
Moderator
Moderator
Posts: 2128
Joined: Sun Jun 26, 2011 2:00 pm
Location: Florida

Re: NCY Shock and tree stem Torque value for Elite Drum to Disk Conversion?

Post by bonesv »

dextermax wrote: Fri Aug 14, 2020 3:50 pm For my Honda Elite Front Drum brake to Disk brake conversion, I have the NCY Triple tree stem and front legs / gas shocks struts.

Two questions:

1. How far should I insert the shocks / legs / struts in to the tree?
----------There are two allen bolts, and on the legs there is one notch at the top. i was thinking that the top notch on the legs should line up with top bolt (there are two bolts on each side)

2. How much should I torque these bolts?

Thanks!
The notch on the forks goes up to top bolt and tighten it as if your life depends on it. But don't break it :surprise:
Honda Elite SR
Honda Elite-Dio ZX

Dio ZX Headlight/Disc Brake Mod: http://hondaspree.net/phpBB3/viewtopic.php?t=30861
dextermax
Noob
Noob
Posts: 7
Joined: Wed Jul 15, 2020 5:36 pm

Re: NCY Shock and tree stem Torque value for Elite Drum to Disk Conversion?

Post by dextermax »

Word! Thank you!
Post Reply