"Squeal" on takeoff or acceleration on Elite 80

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

Post Reply
vagent
Noob
Noob
Posts: 1
Joined: Thu Mar 20, 2008 1:35 pm

"Squeal" on takeoff or acceleration on Elite 80

Post by vagent »

I have a 1999 Honda CH80 Elite.

When I initially accelerate from either a standstill, or coasting, there is a squeal that sounds like two pieces of metal rattling together (like two washers on a shaft).

Once up and running the squeal isn't there.

I've replaced the belt and the weights and basically cleaned the inside of the CVT area. The clutch seems to be in good shape with plenty of lining remaining. However, I still get the squeal. It doesn't appear to be degrading the performance, but is sure is embarrassing when otherwise the scooter is so smooth and quiet.

Thanks for your consideration.

Joe in Hampton Virginia
matsmyth
Noob
Noob
Posts: 3
Joined: Fri Feb 17, 2017 2:54 pm
Location: Texas

Re: "Squeal" on takeoff or acceleration on Elite 80

Post by matsmyth »

Did you ever solve this? Same exact problem. Large loss of power.
User avatar
motormike
Moderator
Moderator
Posts: 5488
Joined: Wed Dec 29, 2010 10:58 pm
Location: Glasgow, KY

Re: "Squeal" on takeoff or acceleration on Elite 80

Post by motormike »

matsmyth: this member posted this in 2008, and never came back.
You will receive notice if you create a post about your specific problem.
You will need to give a good description of the symptoms to get good advice.
Always state the year, and model of your scooter too.
I say that you probably have a badly worn drive belt.
Take off the CVT cover and measure for wear.
Specs for the belt are always in the Service Manual for your model.
Manuals for Elite 80 can be found in the Board Index.
RideRed
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
User avatar
benji
CB900F
CB900F
Posts: 1708
Joined: Mon Aug 10, 2015 9:15 pm
Location: renton,wa

Re: "Squeal" on takeoff or acceleration on Elite 80

Post by benji »

I'd say it's time to open it up and look in there, but I'd guess belt to. Maybe a weakened oem contra?
Post Reply