Hello,
The crankshaft of my second Spree is bent. I need to replace.
Is it possible to repare the crankshaf?
My Crankshaft...
Moderator: Moderator
contact drichardson@core.com he will have it (used) but better then what u have now.cheap too.
00' sa-50 slammed and stretched
89' elite sb, with a 99' af16, (SOLD)
87' spree (SOLD
87' mustang gt vert kenne bell, irs.
90' mustang notch turbo drag car
12' wrx
89' elite sb, with a 99' af16, (SOLD)
87' spree (SOLD
87' mustang gt vert kenne bell, irs.
90' mustang notch turbo drag car
12' wrx
You know, you may be able to fix this with hand tools. If the counterweight halves are bent inward, you can bend it back out with a prybar. If they're bent outward, you could squish them back together in a vice. I've seen this repair description in a moped manual somewhere.
If it's bent torsionally, if the counterweight halves don't line up as you scope down the shaft, you might be able to fix it by using the vice to realign them. This I'm not as sure about.
You'd still need a set of V-blocks and a dial micrometer, but you should be able to do this w/o the press.
Or is just the fan end bent? That's what it looks like in the pics.
If it's bent torsionally, if the counterweight halves don't line up as you scope down the shaft, you might be able to fix it by using the vice to realign them. This I'm not as sure about.
You'd still need a set of V-blocks and a dial micrometer, but you should be able to do this w/o the press.
Or is just the fan end bent? That's what it looks like in the pics.