ok, my friend's spree when you first start it you have to hold the throttle for it to idle.then you have to let it run for like 5mins before it runs good. the carb is clean and has a new electric choke in it.also a new plug. why does it take so long to warm up?
00' sa-50 slammed and stretched
89' elite sb, with a 99' af16, (SOLD)
87' spree (SOLD
87' mustang gt vert kenne bell, irs.
90' mustang notch turbo drag car
12' wrx
Did you check the float inside the carb?
How about the float valve?
Sounds like the float isn't set right.
Might be running to lean.
Otherwise try setting the throttle valve to a different notch setting.
the thing is, if i take the choke completely out of the carb it will run but race. i dont really want to leave it like this because i dont know if it is racing because it is bypassing the throttle valve, which would also bypass fuelflow right? making it run too lean if i just left it out.
00' sa-50 slammed and stretched
89' elite sb, with a 99' af16, (SOLD)
87' spree (SOLD
87' mustang gt vert kenne bell, irs.
90' mustang notch turbo drag car
12' wrx