heard a odd noise then motor cut out and it slowed fast

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

Post Reply
baha_boy
BMX
BMX
Posts: 33
Joined: Tue Jun 10, 2008 7:48 pm

heard a odd noise then motor cut out and it slowed fast

Post by baha_boy »

the noise came around mid RPMs heard it all morning but it was hard to notice. the motor lost all power and cut out immeadiatly and had lots of drag (slowed down to 3mph very fast). it started again and ran fine the next morning. does this sound like a clutch problem? could the motor be running lean and almost of seized? post if you have a clue thanks all
94 Dio MiniStroked Corsa w/ 8.44:1, PGlong 28mm oko
User avatar
mopedman
CB900F
CB900F
Posts: 1214
Joined: Mon Jul 23, 1973 10:24 am
Location: sterling Heights MI
Contact:

Post by mopedman »

do not run it like that till you fix it. it could have small seized, what kind of oil you runing
Michigan Moped Mafia founding member
2005 Yamaha Zuma
1985 Honda Spree
1978 Honda Express
baha_boy
BMX
BMX
Posts: 33
Joined: Tue Jun 10, 2008 7:48 pm

Post by baha_boy »

after a talk with keioni(?) i think your right. i changed my needle setting the day before for some better mpg's. I realized that my oil pump is always wide open and it must of been running lean on the gas. the oil setting saved my ped!
94 Dio MiniStroked Corsa w/ 8.44:1, PGlong 28mm oko
User avatar
mopedman
CB900F
CB900F
Posts: 1214
Joined: Mon Jul 23, 1973 10:24 am
Location: sterling Heights MI
Contact:

Post by mopedman »

yup thats why i wire them all open
Michigan Moped Mafia founding member
2005 Yamaha Zuma
1985 Honda Spree
1978 Honda Express
User avatar
burnt_toast
Veteran OG
Veteran OG
Posts: 3592
Joined: Sat Jul 31, 2004 8:00 pm
Location: Atlanta, GA

Post by burnt_toast »

extra oil wont save you from running lean.. you've still got more oil than fuel compared to amount of air. If its stock leave it at stock settings imo
projects galore :nerd:
baha_boy
BMX
BMX
Posts: 33
Joined: Tue Jun 10, 2008 7:48 pm

Post by baha_boy »

i meant that the oil setting saved it from completly seizing -John
94 Dio MiniStroked Corsa w/ 8.44:1, PGlong 28mm oko
Post Reply