Oiler Problems

surfugsto · Post by **surfugsto** » Thu Jun 16, 2005 2:10 pm

my oiler is giving way too much oil to the spree. my plug is covered in oil always, the top of the piston has this oily carbon-like substance on it-about 1/2mm thick. in addition, i lose power all the time because it keeps adding carbon onto my exhaust port. its about 30-40% covered in carbon, so there is only a small opening for exhaust to get out. please help me do something to keep oiling down

matt · Post by **matt** » Thu Jun 16, 2005 6:36 pm

i had simalar probs. i rasied the needle in the carb to the middle setting and it ran leaner with less build up and a cleaner plug.