Carb Bolt Falls Off - Stripped, Not Proper Size?

Trying to get your Spree/Elite to run, or run better? Post your questions here.

Moderator: Moderator

MotorMaker
Goped
Goped
Posts: 80
Joined: Sun Sep 14, 2008 10:15 pm
Location: North Central Indiana

Post by MotorMaker »

Not to mention bolts are way cheaper than all-thread. :wink:
slaughter83
BMX
BMX
Posts: 24
Joined: Sat Aug 16, 2008 8:36 pm

Post by slaughter83 »

GO with the cheap easy way. I did it on the front and back bolts on my spree. The back one got tight after much screwing, then i used the nut on the other side to tighten it. Works fine
85' NQ-50 under consruction
Andrus
BMX
BMX
Posts: 26
Joined: Fri Aug 25, 2017 10:51 am
Location: United States

Re: Carb Bolt Falls Off - Stripped, Not Proper Size?

Post by Andrus »

Does someone have a link to a nut that will fit in that tiny gap?
mousewheels
Veteran OG
Veteran OG
Posts: 3639
Joined: Tue May 22, 2007 8:10 pm
Location: North of Seattle, WA

Re: Carb Bolt Falls Off - Stripped, Not Proper Size?

Post by mousewheels »

Andrus wrote:Does someone have a link to a nut that will fit in that tiny gap?
One source US wide is Fastenal, they have about 2700 stores.

Link: M6x1.0 Stainless Jam nut - Fastenal
Post Reply