Se50 speed time. In an '86 spree.
Moderator: Moderator
-
- Goped
- Posts: 56
- Joined: Wed Sep 08, 2010 12:35 am
Se50 speed time. In an '86 spree.
I have derestricted my se50 and am using an ruckus variator. I'm pulling just over 40mph on flats here on the stock bore. That's not nearly fast enough in my spree frame and I weight about 140lbs.
So here's the deal, I've got a budget of $600. I want to make this spree as fast as possible. I'm not afraid of swapping motors to something else. I could even grab a different frame!
I'd really like to keep the se50 motor in it and go huge bore/stroke but I can't really find any bbk over 70cc.
So I'm looking for 60mph or faster here, burnouts and wheelies and I'm NOT GOING TO PUT IN A DIO. They don't really come around these parts often and I just really don't care. I'd rather flap in a gy6! Also I'm not concerned with staying under 300cc. My knowledge of the moped/scooter/motorcycle motor world is very very limited. What could fit? What motors have the sweet engine+transmission+brake assembly that would mount up under a spree frame?
Let me know, plus it has to be available. No single year super rare import hot motor from the '80s nonsense. Did that already!
So here's the deal, I've got a budget of $600. I want to make this spree as fast as possible. I'm not afraid of swapping motors to something else. I could even grab a different frame!
I'd really like to keep the se50 motor in it and go huge bore/stroke but I can't really find any bbk over 70cc.
So I'm looking for 60mph or faster here, burnouts and wheelies and I'm NOT GOING TO PUT IN A DIO. They don't really come around these parts often and I just really don't care. I'd rather flap in a gy6! Also I'm not concerned with staying under 300cc. My knowledge of the moped/scooter/motorcycle motor world is very very limited. What could fit? What motors have the sweet engine+transmission+brake assembly that would mount up under a spree frame?
Let me know, plus it has to be available. No single year super rare import hot motor from the '80s nonsense. Did that already!
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: Se50 speed time. In an '86 spree.
put a turbo on it
or
Swap a dio
or
Swap a dio
Last edited by Trafficjamz on Sat May 07, 2011 2:41 am, edited 1 time in total.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
-
- Goped
- Posts: 56
- Joined: Wed Sep 08, 2010 12:35 am
Re: Se50 speed time. In an '86 spree.
Don't be a douche.
- killerpancake
- Spree
- Posts: 240
- Joined: Thu Dec 30, 2010 11:33 pm
- Location: Grand Rapids, MI
Re: Se50 speed time. In an '86 spree.
actually the turbo idea is a good one. upjet at the same time, and you could easily hit what your asking.
If it don't fit, force it. If it breaks, it needed to be replaced anyway.
(Previous)
87 honda spree
85 honda spree
(Current)
88 yammy razz
(parts bike)
another 88 yammy razz
(Previous)
87 honda spree
85 honda spree
(Current)
88 yammy razz
(parts bike)
another 88 yammy razz
Re: Se50 speed time. In an '86 spree.
That statement applies to you. You can not have your cake and eat it too. Pick one, super fast top end or blinding acceleration. These things don't have 6 speed trannies, so you can't have both.nickisaninja wrote:Don't be a douche.
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
-
- Goped
- Posts: 56
- Joined: Wed Sep 08, 2010 12:35 am
Re: Se50 speed time. In an '86 spree.
Don't stroke out, old man.Bear45-70 wrote:That statement applies to you. You can not have your cake and eat it too. Pick one, super fast top end or blinding acceleration. These things don't have 6 speed trannies, so you can't have both.nickisaninja wrote:Don't be a douche.
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: Se50 speed time. In an '86 spree.
Think leaf blower on a small car motor. Maybe a small, modified hair dryer on a spree?
An electric turbo would be simple and efficient on a scooter.
I'm sorry you're offended that you didn't think of this first.
http://www.amazon.com/Flange-Mount-Blow ... B001449SYU
I'll bet you're going to try and tell me THAT isn't going to make a spree faster?
Do this turbo Idea.....it is a waaaay better Idea than swapping a DIO
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
- killerpancake
- Spree
- Posts: 240
- Joined: Thu Dec 30, 2010 11:33 pm
- Location: Grand Rapids, MI
Re: Se50 speed time. In an '86 spree.
HOLY CRAP, THAT"S MY NEXT UPGRADE. wonder if it makes the whistle too....
If it don't fit, force it. If it breaks, it needed to be replaced anyway.
(Previous)
87 honda spree
85 honda spree
(Current)
88 yammy razz
(parts bike)
another 88 yammy razz
(Previous)
87 honda spree
85 honda spree
(Current)
88 yammy razz
(parts bike)
another 88 yammy razz
-
- Goped
- Posts: 56
- Joined: Wed Sep 08, 2010 12:35 am
Re: Se50 speed time. In an '86 spree.
You've got a sad life.
By the way, the my little pony forums respond better than you do.
By the way, the my little pony forums respond better than you do.
Re: Se50 speed time. In an '86 spree.
Don't be a moron, punk.nickisaninja wrote:Don't stroke out, old man.Bear45-70 wrote:That statement applies to you. You can not have your cake and eat it too. Pick one, super fast top end or blinding acceleration. These things don't have 6 speed trannies, so you can't have both.nickisaninja wrote:Don't be a douche.
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
- killerpancake
- Spree
- Posts: 240
- Joined: Thu Dec 30, 2010 11:33 pm
- Location: Grand Rapids, MI
Re: Se50 speed time. In an '86 spree.
who? what? why are we fighting?
If it don't fit, force it. If it breaks, it needed to be replaced anyway.
(Previous)
87 honda spree
85 honda spree
(Current)
88 yammy razz
(parts bike)
another 88 yammy razz
(Previous)
87 honda spree
85 honda spree
(Current)
88 yammy razz
(parts bike)
another 88 yammy razz
-
- Goped
- Posts: 56
- Joined: Wed Sep 08, 2010 12:35 am
Re: Se50 speed time. In an '86 spree.
Don't fall off your high horse, you'll break a hip.Bear45-70 wrote:Don't be a moron, punk.
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: Se50 speed time. In an '86 spree.
I have four scooters that go over 60mph.nickisaninja wrote:You've got a sad life.
You have delusions about 300cc sprees and leaf blower turbo setups.
How did that work out ?Way back in September of 2010 nickisaninja wrote:I should be able to get everything done in under $200. I'm waiting on intake, pipe, ramp plate, jets, various other parts before I start the
ELECTRIC TURBO!
If you wanna make a spree go over 60mph, swap in a dio Why are you so against the obvious answer?
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
-
- Goped
- Posts: 56
- Joined: Wed Sep 08, 2010 12:35 am
Re: Se50 speed time. In an '86 spree.
I blew up my last se50 from an electric ducted fan, looks like way too much heat. I was using two 7.2v li-po batteries and a controller from a traxxas emaxx. The jug cracked and everything from connecting rod up is toast. They're not made to do work.Trafficjamz wrote:I have four scooters that go over 60mph.nickisaninja wrote:You've got a sad life.
You have delusions about 300cc sprees and leaf blower turbo setups.
How did that work out ?Way back in September of 2010 nickisaninja wrote:I should be able to get everything done in under $200. I'm waiting on intake, pipe, ramp plate, jets, various other parts before I start the
ELECTRIC TURBO!
If you wanna make a spree go over 60mph, swap in a dio Why are you so against the obvious answer?
I'm against the obvious answer because they're simply not available here and I'm not shipping a moped motor here that's ridiculous.
Re: Se50 speed time. In an '86 spree.
You got a $600 budget. AF16 already built for $550 shipped OBO http://www.hondaspree.net/phpBB3/viewto ... =2&t=18738
Where is "here"?I'm against the obvious answer because they're simply not available here and I'm not shipping a moped motor here that's ridiculous.
2001 Honda Elite
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.