Beginning Break In Process

Does your Spree/Elite already run great, and you're trying to make it quicker/faster? Need a monster motor swap? Discuss your ideas here.

Moderator: Moderator

User avatar
wiguy05
Elite
Elite
Posts: 568
Joined: Sat Aug 09, 2008 8:48 pm
Location: Janesville, WI

Re: Beginning Break In Process

Post by wiguy05 »

bakaracer wrote:you can buy a jet kit that has 10 jets for less than $30 shipped on ebay or from treatland

http://www.treatland.tv/OKO-idle-jets-p ... s-carb.htm

http://www.treatland.tv/OKO-main-jets-s ... -small.htm
Good point baka....it's usually cheaper for me because I only order 4-5 jets!
2006 Sachs Madass
- FTP 140cc Kit
- Stock 125cc undertail exhaust

2006 Xkeleton Trickster
- Lifan 90cc auto
User avatar
bakaracer
CBR1000RR
CBR1000RR
Posts: 3584
Joined: Tue Jan 27, 2009 9:51 pm
Location: tacoma,wa
Contact:

Re: Beginning Break In Process

Post by bakaracer »

or you can look for someone selling a whole bunch of keihin pwk style jets on craigslist or ebay. if you plan on playing with these scooters for a while,those jets will come in handy
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
User avatar
Petrock's 1984 Spree
Elite
Elite
Posts: 768
Joined: Wed Dec 01, 2010 10:20 pm
Location: Iowa

Re: Beginning Break In Process

Post by Petrock's 1984 Spree »

I used wiguy's suggested website. Great place!

I wanted a smaller interval between jets so i grabbed a 108, 110, 112, 115, 118 main

Great stuff!

I think ill start with a 45, 115 and go from there
Complete NOOB, sorry dudes
1984 Iowa Spreedio aka "Hammy"
-72cc Polini Corsa
-V8 Typhoon Exhaust
-21mm OKO & CT Mani
-ZX Trans 1k Contra
-8.44:1 Gears
-Polini 2 Shoe Clutch
-Koso Vented Clutch Bell
-Polini Ruckus Vari w/ 6.9g weights
-669x18x30 Belt
Post Reply