stage 3 spree. need a pipe!!!

[SuprasNsprees]

hard to believe there are engine/carb/gear sets available but not an exhaust pipe.

started riding with some hardcore 2t dudes, and figured something out real quick. no one has the stock pipe on their bike and it feels like a huge step was skipped

so, i'm very handy with a welder and metal fab, but i really don't have the 2t know-how to make one from scratch. so i started thinking about using the stock spree pipe from the flange down 8-9",and weld another pipe from an Elite or something to it

any thoughts?

[paulpauly7]

you can only but try

having no cvt you will be able to hear and feel when your pipe kicks in and work from there.Be prepared for more cutting and welding than you expect

[kingkamehameha]

viewtopic.php?f=8&t=3464
You should read the advanced tech doc section before posting questions like this

[ragtop89]

Nah, thats why there are dogs like you to fetch stuff for people.

[SuprasNsprees]

viewtopic.php?f=8&t=3464
You should read the advanced tech doc section before posting questions like this

I posted looking first-hand experience. It's hard to talk down your nose at somebody when you can't repair a damaged tab on a pipe



I really like the look of the V8 pipe. Think I might try that

[SuprasNsprees]

Think I'm going to try this
https://www.treatland.tv/big-large-giga ... hamber.htm

[eliteguy50]

I would start higher on the spree header than 9", that will still limit your top end.

[kingkamehameha]

viewtopic.php?f=8&t=3464
You should read the advanced tech doc section before posting questions like this

I posted looking first-hand experience. It's hard to talk down your nose at somebody when you can't repair a damaged tab on a pipe



I really like the look of the V8 pipe. Think I might try that

You really want to talk smack boy? Look at your spree build and look at mine. I dont even need words to put you in your place

[Downsouthdio]

Im not 100% sure , but you guys might want to call moped hospital for an exhaust .. Or id just use the tenigas for the af16 to work with if your going to cut and weld.. But like i said call moped hospital here in key west.. They might have something.. Also anyone looking for arreche 19mm carbs For the stock af16 manifold can call them.. They have all the jets to.. Tecnigas pipes for the af16 as well..

[SuprasNsprees]

viewtopic.php?f=8&t=3464
You should read the advanced tech doc section before posting questions like this

I posted looking first-hand experience. It's hard to talk down your nose at somebody when you can't repair a damaged tab on a pipe

You really want to talk smack boy? Look at your spree build and look at mine. I dont even need words to put you in your place

you did an engine swap, you stupid a*s. lol

apples/oranges. spend less time being an a*ss, and more time learning fabrication BASICS



eliteguy,and Downsouth. thanks, for not being a Queenkamehameha. i'll call moped hospital

[ragtop89]

Yikes.

[damnSA50]

http://www.fentonpowersports.com/
http://www.vespastl.com/
http://maplewoodscootercompany.com/
try fenton first, the guy is a really nice guy and if he doesnt have anything he can order it for cheap.

[damnSA50]

http://stlphins.com/slsc/index.php
good people to help you locally

[SuprasNsprees]

http://stlphins.com/slsc/index.php
good people to help you locally

i'm part of that board, but they all seem to be in the BIG scooters. i'll certainly ask though

http://www.fentonpowersports.com/
http://www.vespastl.com/
http://maplewoodscootercompany.com/
try fenton first, the guy is a really nice guy and if he doesnt have anything he can order it for cheap.

cool,man. i'll make some more calls

left a message with Moped Hospital, but they seem to have forgotten to call me back

[eliteguy50]

I don't know you called them but its only 7:40am in HI.