overheating problems
Moderator: Moderator
-
- Noob
- Posts: 15
- Joined: Mon Dec 12, 2011 3:15 am
- Location: oahu
overheating problems
i have an 120 stroker and my bike always gets hot very fast even just cursing at 45mph
i recently got a new bore and want to find out what i can do to prevent my bike from overheating
specs on my motor:
-new pg bore
-28oko
-stroker scopion pipe
-6.8 gears
wanted to know what compression i should set it at?
what jets i should put or start on?
what springs and weights i should run or start with?
i recently got a new bore and want to find out what i can do to prevent my bike from overheating
specs on my motor:
-new pg bore
-28oko
-stroker scopion pipe
-6.8 gears
wanted to know what compression i should set it at?
what jets i should put or start on?
what springs and weights i should run or start with?
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: overheating problems
how hot is hot???
swimmingfree
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
-
- Noob
- Posts: 15
- Joined: Mon Dec 12, 2011 3:15 am
- Location: oahu
Re: overheating problems
my temp reads 375-400
Re: overheating problems
Yeah that's hot for just cruising. What's the compression at?
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
-
- Noob
- Posts: 15
- Joined: Mon Dec 12, 2011 3:15 am
- Location: oahu
Re: overheating problems
i had 130compression on my old bore that was running hot all the time
now got a new bore and wanted to find out whhats a good comprsion so i dont have the same probles
now got a new bore and wanted to find out whhats a good comprsion so i dont have the same probles
Re: overheating problems
Make sure the tester end is on tight snd the oring on the end is good. Keep kicking it till the needle stops.kick it hard too. I add head gasket to lower the compression and not base gaskets.mske sure the fuel line is going in a down hill flow. If at any time the line is either flat or going in a uphill flow, the carb will lean out
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
-
- Noob
- Posts: 15
- Joined: Mon Dec 12, 2011 3:15 am
- Location: oahu
Re: overheating problems
lines are all down hill facing
what would be a good compresion should i set it at
what would be a good compresion should i set it at
Re: overheating problems
130 is good. Makes sure everything is tight. Triple check even the next day when its cold. Not always you will see signs of leakage. Most times its sucking air in.
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
-
- Noob
- Posts: 15
- Joined: Mon Dec 12, 2011 3:15 am
- Location: oahu
Re: overheating problems
what about jets?
Re: overheating problems
Start with the common jetting starting point and carb adjustment and go from there.
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: overheating problems
not saying i no what size jets to run but what jet are you running now ?? have you done a plug crop????
swimmingfree
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Re: overheating problems
LOL not the dreaded plug chop!!
I dont know if you remember that guy Kenny Mcormic sp?
he would answer everything with Plug Chop lol
I dont know if you remember that guy Kenny Mcormic sp?
he would answer everything with Plug Chop lol
Re: overheating problems
since i got a cht i rarely do plug chops anymore : P
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged![Very Happy :D](./images/smilies/icon_biggrin.gif)
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
![Very Happy :D](./images/smilies/icon_biggrin.gif)
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
- patthesoundguy
- Moderator
- Posts: 3159
- Joined: Mon Mar 29, 2010 11:38 am
- Location: Nova Scotia, Canada
- Contact:
Re: overheating problems
Amen to thatMystic wrote:since i got a cht i rarely do plug chops anymore : P
![Smile :-)](./images/smilies/icon_smile.gif)
Sent from my Nexus 7 using Tapatalk 2
Dude! Ya Can't Fix Stupid!
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock