corsa pg long build help
Moderator: Moderator
- Dustyn2007
- Spree
- Posts: 126
- Joined: Mon Sep 30, 2013 3:19 pm
- Location: Indiana
corsa pg long build help
ok guys just removed malossi cast bbk and v8 pipe and installed corsa and pg long I was thinking this would rip it has 24mm oko 9to1 1500 clutch and contra ive messed with rollers and jetting this thing is a turd down low the other set up would walk all over this set up anyway to get low end (wheelie power out of this set up or pg wrong pipe?the 24mm a good carb or go bigger?
- paulpauly7
- CB900F
- Posts: 1945
- Joined: Tue Feb 21, 2012 6:57 pm
- Location: nz
Re: corsa pg long build help
if i was you and wanted a wheelie monster then go 21mm carb and stick with the v8 pipe .
86 Nifty Fifty (spree)
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
- Wheelman-111
- Moderator
- Posts: 11319
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: corsa pg long build help
Greetings:
FWIW, my Corsa seemed to like the 26mm OKO best of all - it got higher top speed, anyway. But for all-around street performance and easy-to-tunability, the 24 is enough and perhaps the best compromise.
FWIW, my Corsa seemed to like the 26mm OKO best of all - it got higher top speed, anyway. But for all-around street performance and easy-to-tunability, the 24 is enough and perhaps the best compromise.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Re: corsa pg long build help
Try changing the torque spring and the clutch springs. Be sure the belt is correct size and try to have some patience with it all. You're learning. Enjoy the journey.Dustyn2007 wrote:ok guys just removed malossi cast bbk and v8 pipe and installed corsa and pg long I was thinking this would rip it has 24mm oko 9to1 1500 clutch and contra ive messed with rollers and jetting this thing is a turd down low the other set up would walk all over this set up anyway to get low end (wheelie power out of this set up or pg wrong pipe?the 24mm a good carb or go bigger?
Honda Elite SR
Honda Elite-Dio ZX
Dio ZX Headlight/Disc Brake Mod: http://hondaspree.net/phpBB3/viewtopic.php?t=30861
Honda Elite-Dio ZX
Dio ZX Headlight/Disc Brake Mod: http://hondaspree.net/phpBB3/viewtopic.php?t=30861
Re: corsa pg long build help
For wheelies do a 1500 or 2k center with stock or 1k rpm triple springs. That will wheelie a 49cc.
- Dustyn2007
- Spree
- Posts: 126
- Joined: Mon Sep 30, 2013 3:19 pm
- Location: Indiana
Re: corsa pg long build help
If I do that the rpm would built any for the pipe to make power would it?