hi forum.
whats the highest temperature the Malossi BBK has ever gone without having any damage?
I've had my Corsa go to 425 degrees with no damage.
thanks in advance.
whats the highest temperature on Malossi MHR BBK?
Moderator: Moderator
whats the highest temperature on Malossi MHR BBK?
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
Re: whats the highest temperature on Malossi MHR BBK?
430 degree aluminum mhr
Re: whats the highest temperature on Malossi MHR BBK?
Thats gotta be * to troubleshoot. Especially 2 of them.
98 Elite
4 strokes are for cars
4 strokes are for cars
- paulpauly7
- CB900F
- Posts: 1945
- Joined: Tue Feb 21, 2012 6:57 pm
- Location: nz
Re: whats the highest temperature on Malossi MHR BBK?
i have seen malossi mhr knock offs .cheap china kits with malossi markings .ive done 420 on my corsa .i did hit 525 on my ts185 the other week i pulled it apart and the bore looks fine and it still ride fine but i did upjet it .
86 Nifty Fifty (spree)
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
Re: whats the highest temperature on Malossi MHR BBK?
So 430 is max for malossi MHR.
300 max the for the china copy MHR ones? I wonder who sells them?
I know malossi cools down quicker. but which one can take the most heat? corsa or malossi?
300 max the for the china copy MHR ones? I wonder who sells them?
I know malossi cools down quicker. but which one can take the most heat? corsa or malossi?
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: whats the highest temperature on Malossi MHR BBK?
Greetings:
Both are quality kits, and I've had both bust 400 on a few occasions. That said, I don't think you can generalize by brand. Surely a lot depends on the Compression ratio at setup, the RPMs you run, the fuel used and many other variables that can make for detonation and grenading at a cooler or hotter temp. Regardless of brand, once the temp goes critical and detonation begins, the Life Expectancy is reduced to fractions of a second. The gauge is too slow to record the carnage. My last Malossi had not a scratch when I removed it. The Corsa was similarly pristine, at least until I fed it a carb needle E-clip. Both saw 400-ish on occasion.
Both are quality kits, and I've had both bust 400 on a few occasions. That said, I don't think you can generalize by brand. Surely a lot depends on the Compression ratio at setup, the RPMs you run, the fuel used and many other variables that can make for detonation and grenading at a cooler or hotter temp. Regardless of brand, once the temp goes critical and detonation begins, the Life Expectancy is reduced to fractions of a second. The gauge is too slow to record the carnage. My last Malossi had not a scratch when I removed it. The Corsa was similarly pristine, at least until I fed it a carb needle E-clip. Both saw 400-ish on occasion.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Re: whats the highest temperature on Malossi MHR BBK?
450 is melting point for aluminum. If it's a hypereutectic piston, heat can go higher due to more silica in the aluminum to take the heat and not expand as much. I would shoot for 380-390f peak cht at wot. If your in the 400+ you risk seizing. Especially if your pilot is not set correct for throttle off after wot.
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Re: whats the highest temperature on Malossi MHR BBK?
My tai 50mm sees 430+ some days, no seize action. I have MHRs and Corsas on the shelf but have not used one yet. I was not expecting so much life out of the cheap tai BBK.
2000 Elite SR50 -THE PURPLE NURPLE
50mm BBK (tai)
26mm OKO (round slide) 135 Main Jet
V-8 pipe
39/18 secondary gears (7.583:1 ratio)
36 grams in Prodigy variator
Malossi Delta Clutch & WIng Bell- Thanks RED EFT
65mph GPS (on the freeway)
50mm BBK (tai)
26mm OKO (round slide) 135 Main Jet
V-8 pipe
39/18 secondary gears (7.583:1 ratio)
36 grams in Prodigy variator
Malossi Delta Clutch & WIng Bell- Thanks RED EFT
65mph GPS (on the freeway)