125cc LC break in

Does your Spree/Elite already run great, and you're trying to make it quicker/faster? Need a monster motor swap? Discuss your ideas here.

Moderator: Moderator

Post Reply
Peteyparado
Spree
Spree
Posts: 280
Joined: Fri Feb 26, 2016 4:02 am
Location: Hawaii

125cc LC break in

Post by Peteyparado »

Just finish building a LC taida 125cc square type.
I haven't build a motor from crank to head in years.i would like to know break in period for this size motor.. Or is it the same as s 70cc air cool ?
86 aero af16 swap. 121cc water cool.
Polini 30mm carb
Naraku mani
Scorpion stroker pipe
Stage6 CDI
5gram rollers
Keli high speed Variator
6.1 gears
94mph
Top
Peteyparado
Spree
Spree
Posts: 280
Joined: Fri Feb 26, 2016 4:02 am
Location: Hawaii

Re: 125cc LC break in

Post by Peteyparado »

Ok sounds good g9.what do u think on miles or tanks of gas or just the 10 or so heats cycles ..b4 dropping the hammer..
86 aero af16 swap. 121cc water cool.
Polini 30mm carb
Naraku mani
Scorpion stroker pipe
Stage6 CDI
5gram rollers
Keli high speed Variator
6.1 gears
94mph
Top
Peteyparado
Spree
Spree
Posts: 280
Joined: Fri Feb 26, 2016 4:02 am
Location: Hawaii

Re: 125cc LC break in

Post by Peteyparado »

How long is a typical heat cycle??
86 aero af16 swap. 121cc water cool.
Polini 30mm carb
Naraku mani
Scorpion stroker pipe
Stage6 CDI
5gram rollers
Keli high speed Variator
6.1 gears
94mph
Top
Hppowdercoatings
Board Supporter
Board Supporter
Posts: 343
Joined: Mon Apr 28, 2014 8:55 am
Location: Wentzville,Mo

Re: 125cc LC break in

Post by Hppowdercoatings »

Peteyparado wrote:How long is a typical heat cycle??
As 1man8scoots suggested to me the Length of a heat cycle does not matter as much as the Temp.
Get up to operating Temp , 140-180-deg for watercooled setup then let cool to Ambient Temp then repeat. They say 5-10 Heat cycles..
I have done that with mine , also varying the Rpm but nothing crazy high & no more then Half Throttle...
Top
Post Reply

Return to “Performance Technical”